24 May 2021 in IEEE Transactions on Instrumentation and Measurement
We propose a method that realizes laser ranging and communication at the same time based on dual-pulse interval modulation (DPIM). The transmission of binary data bits in the communication process is realized by sending two laser pulses continuously, and the time interval between the dual pulse is used to characterize the value of this bit (0 or 1). Meanwhile, the echo signal received by the communication transmitter is also a dual pulse signal, which enables laser ranging by the time-of-flight (TOF) principle. This method can effectively improve the reliability of system communication. Furthermore, the system structure is rather simple, including one piece of field programable logic gate array (FPGA) chip, one piece of time-to-digital converter (TDC) chip, and a transmitting and receiving circuits. The experimental results show that this method and system can achieve effective and reliable transmission of 2-D images and characters at the ranging accuracy of a single laser ranging system.
5 January 2022 in IEEE Transactions on Instrumentation and Measurement
The optical phased array (OPA) chip is becoming the core component of all-solid-state lidars. In order to realize the wide-angle range beam scanning and rapid control of OPA-based solid-state lidars, we design and fabricate a 64-channel silicon-based OPA chip based on thermo-optical modulation. In accordance with the optical phase control characteristics of the multichannel thermo-optic OPA chip, we propose a parallel random access memory (RAM) array technique to realize high-speed phase control for the OPA chip and build the hardware system with a field-programmable logic gate array (FPGA). This system is used to test the main performance indicators of the OPA chip and realizes the high-speed scanning control of the wide-angle range of the OPA output beam. The test results show that the OPA chip we designed can achieve fast beam scanning within a large angle range between −32.5° and +32.5°, and the chip has high working reliability. Combined with the control system we build, it can meet the high-speed radar scanning requirements of all-solid-state lidars. This work lays a good foundation for the subsequential development of our thermo-optical and electrooptic OPA all-solid-state lidar prototypes.
4 October 2021 in IEEE Transactions on Instrumentation and Measurement
We propose a pulsed laser ranging method based on a multiecho delay trigger, which improves the precision of pulsed laser ranging. A signal delay unit is used to accurately delay the pulse-echo signal. In a fixed time window, the echo delay pulse triggers the laser transmitter to generate pulsed laser light; meanwhile, the counter records several echo pulses received, and then, the actual distance can be calculated. In terms of improving the ranging precision, this method overcomes the essential of higher time resolution time-to-digital converter (TDC) chip in traditional time-of-flight (TOF) pulsed laser ranging. The method can be realized by using a field-programmable logic gate array (FPGA) chip, a delay unit, and a set of laser transmitters and receivers, which makes the system structure simple and low cost. Experimental results show that this method can achieve more accurate distance measurement and significantly reduced error, to the best of our knowledge, which improves the pulsed laser ranging from centimeter- to millimeter-order precisions. We believe that this method has a promising application prospect in the field of high-precision pulsed laser ranging of fixed targets.