Nick Bosco

Nick Bosco

Auto-generated profile, based on publicly available information

Nick Bosco

National Renewable Energy Laboratory, Golden, CO, USA

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2017 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
JTJared Tracy
Jared Tracy
NBNick Bosco
Nick Bosco
RDReinhold Dauskardt
Reinhold Dauskardt
Delamination of encapsulant materials from PV cell surfaces often appears to originate at regions with metallization. Using a fracture mechanics based metrology, the adhesion of ethylene vinyl acetate (EVA) encapsulant to screen-printed silver metallization was evaluated. At room temperature, the fracture energy G$_{c}$ [J/m2] of the EVA/silver interface (952 J/m2) was ∼70% lower than that of the EVA/antireflective (AR) coating (>2900 J/m2) and ∼60% lower than that of the EVA to the surface of cell (2265 J/m2). After only 300 h of damp heat aging, the adhesion energy of the silver interface dropped to and plateaued at ∼50–60 J/m2 while that of the EVA/AR coating and EVA/cell remained mostly unchanged. Elemental surface analysis showed that the EVA separates from the silver in a purely adhesive manner, indicating that bonds at the interface were likely displaced in the presence of humidity and chemical byproducts at elevated temperature, which in part accounts for the propensity of metalized surfaces to delaminate in the field.

20 July 2020 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
NBNick Bosco
Nick Bosco
MSMartin Springer
Martin Springer
XHXin He
Xin He
Numerical tools, such as the finite-element method, are increasingly used to design and evaluate the photovoltaic (PV) modules, providing for the reduction of development time and improved performance and reliability. However, high-fidelity material models are necessary to accurately model the complex structural behavior of the involved packaging materials. A common simplification used in recent years is to model the polymer materials (i.e., encapsulant and backsheet) as linear elastic, which will lead to inaccurate results. Therefore, in this work, we present a thorough characterization of the time- and temperature-dependent mechanical response of predominant PV module encapsulant and backsheet materials. Based on this material characterization, we developed and experimentally validated generalized Maxwell models to describe each material's viscoelastic response. In addition, we included measurements of the coefficient of thermal expansion and presented all material models in such a fashion for direct input into commercial finite-element method modeling software.

4 October 2017 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
NBNick Bosco
Nick Bosco
JEJoshua Eafanti
Joshua Eafanti
SKSarah Kurtz
Sarah Kurtz
JTJared Tracy
Jared Tracy
RDReinhold Dauskardt
Reinhold Dauskardt
The width-tapered cantilever beam method is used to quantify the debond energy (adhesion) of encapsulant and backsheet structures of 32 modules collected from the field. The collected population of modules contains both those that have remained intact and those with instances of either or both encapsulant and backsheet delamination. From this survey, initial threshold values (an adhesion value above which a module should remain intact throughout its lifetime) for encapsulant and backsheet interfaces are proposed. For encapsulants this value is ∼$160\,{\text{J}\text{/}\text{m}}^{2}$ and for backsheets ∼$10\,{\text{J}\text{/}\text{m}}^{2}$. It is expected that these values will continue to be refined and evolve as the width-tapered cantilever beam method gets adopted by the PV industry, and that they may aid in the future improvement of accelerated lifetime tests and the development of new, low-cost materials.

15 January 2019 in Progress in Photovoltaics: Research and Applications
Verified
Journal Article
Closed access
PDF file
NBNick Bosco
Nick Bosco
SMStephanie Moffitt
Stephanie Moffitt
LSLaura T. Schelhas
Laura T. Schelhas

2 April 2019 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
LSLaura Spinella
Laura Spinella
NBNick Bosco
Nick Bosco
The chemical makeup of ethylene vinyl acetate (EVA) interfaces in photovoltaic (PV) modules is probed via Fourier-transform infrared spectroscopy (FTIR) to determine the impact of the EVA formulation on the adhesion degradation. EVA samples laminated with glass particles are used to demonstrate the effect of damp heat exposure on the glass-EVA interface, showing that increasing silane content increases chemical stability. Delamination interfaces created in one cell modules demonstrate a high correlation between the siloxane bonding at the silicon cell-EVA interface and the debond energy. A significant decrease in debond energy after UV exposure is also shown to be due in part to decreasing siloxane bond density at the interface. However, FTIR results indicated contributions to the adhesion beyond the chemical interface, and a basic tensile test indicates increasing bulk mechanical properties with increasing silane. These results demonstrate the importance of the EVA formulation on its adhesion performance and long-term reliability. Furthermore, it is shown that FTIR is a capable technique for assessing and quantifying chemical mechanisms within PV modules. These results can then be used to more effectively model module lifetimes and to better design polymer systems for PV modules.

13 December 2018 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
NBNick Bosco
Nick Bosco
JTJared Tracy
Jared Tracy
RDReinhold Dauskardt
Reinhold Dauskardt