Sodium-ion batteries are very promising complementary power sources usable in applications where cost of starting materials and battery itself is more important than its energy density. Mixed sodium titanate anode material with two electroactive crystallographic phases was successfully synthesized via microwave assisted hydrothermal synthesis. The electrochemical performance of Na2Ti3O7/Na2Ti6O13 mixed material is reported together with its structural characterization. SEM images revealed that the final product has nanorods-like structure. The widths of the particles are in the range of hundreds of nanometers and are strongly dependent on calcination temperature unlike the particle lengths remain almost unchanged with the temperature and are in the range of several microns. The initial discharge capacity of the material is 90 mAh/g.
High temperature solid state synthesis was used for preparation of LiFePO4/C composite material and cobalt doped LiFePO4/C composite material. Glycine assisted combustion method was involved as a carbon coating procedure. It uses glycine as a carbon precursor for conductive coating and connecting of active material nanoparticles. Two different samples were prepared and investigated - clear LiFePO4/C material and LiFePO4/C doped with 1% of cobalt. The aim of this work is to show how a supervalent ion of cobalt influences parameters of cathode material. Electrochemical characterization by galvanostatic cycling, electrochemical impedance spectroscopy and rate capability was made and physical characterization by SEM, TEM and X-ray diffraction was provided.