16 November 2011 in IEEE Geoscience and Remote Sensing Letters
This letter introduces a new approach for light detection and ranging (LiDAR) waveform decomposition. First, inflection points are identified by the Ramer-Douglas-Peucker curve-fitting algorithm, and each inflection point has a corresponding baseline during curve fitting. Second, according to the spatial relation between the baseline and the inflection point, peaks are selected from the inflection points. The distance between each peak and its baseline and the maximum number of peaks are employed as a criterion to select a “significant” peak. Initial parameters such as width and boundaries of peaks provide restraints for the decomposition; right and left boundaries are estimated via a conditional search. Each peak is fitted by a Gaussian function separately, and other parts of the waveform are fitted as line segments. Experiments are implemented on waveforms acquired by both small-footprint LiDAR system LMS-Q560 and large-footprint LiDAR system Laser Vegetation Imaging Sensor. The results indicate that the algorithm could provide an optimal solution for LiDAR waveform decomposition.
18 May 2015 in Optics Express
Urban land cover map is essential for urban planning, environmental studies and management. This paper aims to demonstrate the potential of geometric and radiometric features derived from LiDAR waveform and point cloud data in urban land cover mapping with both parametric and non-parametric classification algorithms. Small footprint LiDAR waveform data acquired by RIEGL LMS-Q560 in Zhangye city, China is used in this study. A LiDAR processing chain is applied to perform waveform decomposition, range determination and radiometric characterization. With the synergic utilization of geometric and radiometric features derived from LiDAR data, urban land cover classification is then conducted using the Maximum Likelihood Classification (MLC), Support Vector Machines (SVM) and random forest algorithms. The results suggest that the random forest classifier achieved the most accurate result with overall classification accuracy of 91.82% and the kappa coefficient of 0.88. The overall accuracies of MLC and SVM are 84.02, and 88.48, respectively. The study suggest that the synergic utilization of geometric and radiometric features derived from LiDAR data can be efficiently used for urban land cover mapping, the non-parametric random forest classifier is a promising approach for the various features with different physical meanings.
1 November 2012 in Optics Express
This paper presents a range determination approach for generating point clouds from small footprint LiDAR waveforms. Waveform deformation over complex terrain area is simulated using convolution. Drift of the peak center position is analyzed to identify the first echo returned by the illuminated objects in the LiDAR footprint. An approximate start point of peak in the waveform is estimated and adopted as the indicator of range calculation; range correction method is proposed to correct pulse widening over complex terrain surface. The experiment was carried out on small footprint LiDAR waveform data acquired by RIEGL LMS-Q560. The results suggest that the proposed approach generates more points than standard commercial products; based on field measurements, a comparative analysis between the point clouds generated by the proposed approach and the commercial software GeocodeWF indicates that: 1). the proposed approach obtained more accurate tree heights; 2). smooth surface can be achieved with low standard deviation. In summary, the proposed approach provides a satisfactory solution for range determination in estimating 3D coordinate values of point clouds, especially for correcting range information of waveforms containing deformed peaks.