10 October 2022 in International Journal of Geosynthetics and Ground Engineering
19 December 2023 in Journal of Sustainable Construction Materials and Technologies
Brick is one of the most used building materials in masonry construction. Conventionally burnt clay bricks are used. These bricks are manufactured from clay and burnt in a kiln at a higher temperature. This results in a very high amount of CO2 emission and has high embodied energy, which highly affects the environment. Compressed bricks are one of the sustainable solutions to overcome these issues of high CO2 emission and embodied energy. Adopting sustainable alter- natives, such as compressed bricks incorporating supplementary cementitious materials or envi- ronmentally friendly brick manufacturing processes, can help mitigate these issues and promote more sustainable construction practices. In this study, attempts have been made to manufacture and test the bricks with different proportions of the soil, i.e., the mix of locally available soil with sand, cement as the cementitious materials, and SCMs like fly ash & GGBS. The research methodology involves the formulation of different mixtures with varying proportions of SCMs. The specimens were then prepared using a compression molding technique and cured under controlled conditions. This research paper aims to investigate the effects of incorporating sup- plementary cementitious materials (SCMs) on the properties of compressed bricks. The study focuses on evaluating the density, compressive strength, water absorption, and efflorescence, as well as calculating the embodied energy and carbon dioxide emissions associated with the pro- duction of these bricks. Furthermore, the paper comprehensively analyzes the embodied energy and CO2 emissions associated with producing compressed bricks. These calculations consider the energy consumed and CO2 emitted in manufacturing, including raw material extraction, transportation, and brick fabrication. The study's results demonstrate the influence of SCMs on the properties of the compressed bricks. The analysis of embodied energy and CO2 emissions provided valuable insights into the environmental sustainability of the brick production process.
1 May 2016 in Geotechnical Testing Journal
One of the key parameters for the performance of a pavement is uniformity of its sub-grade. In situ assessment for the uniformity of the sub-grade is commonly carried out by measuring the density of soil mass. Measurement of the density is done by cutting a core from the soil mass. According to ASTM D6951-09 (2009) the soil density may be estimated if the soil type and moisture content are known from the dynamic cone penetrometer (DCP) penetration rate. The DCP test is a soil-penetration test that is used for the measurement of sub-grade strength. In this paper, empirical correlations were developed for estimation of in situ density of the sub-grade material from DCP penetration rate and moisture content. These relations were developed using multi-linear regression analysis for different soils, namely Black Cotton Soil, Yellow Soil, and Moorum (lateritic soil). It also developed a generalized correlation for density using a power function model.
1 October 2011 in International Journal of Geotechnical Engineering
13 April 2025 in Indian Geotechnical Journal
1 July 2012 in International Journal of Geotechnical Engineering
In this paper, an attempt has been made to obtain dynamic increment and dynamic decrement of earth pressure in yielding gravity walls located in seismic regions having partially submerged cohesionless backfill in active and passive cases respectively. Inclined backface wall with inclined backfill having uniformly distributed surcharge has been considered in the analysis. Expressions have been developed for computation of both the dynamic increment in active case and dynamic decrement in passive case with their points of application from the base of wall. Results have been presented in the form of non-dimensional charts.