1 April 2022 in Journal of Materials in Civil Engineering
The improved properties of ethylene-vinyl acetate (EVA)-modified cement-based materials have not been fully clarified, especially crack resistance and pore structure. The purpose of this research was to investigate the influence of EVA copolymer on the mechanical performances and microstructural properties of cement paste. Strengths, autogenous and drying shrinkage, and water absorption expansion were investigated to evaluate the mechanical properties and volume stability. The ring restrained shrinkage and chloride permeability tests revealed the crack resistance and enhancement of impermeability. The microstructures of EVA-modified cement-based materials were characterized by scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP) techniques. The experimental results indicated that mixing EVA into cement-based materials increased the flexural strength, reduced the crack propagation and chloride ion penetration, and reduced the negative capillary pressure by improving the water retention. The addition of EVA resulted the remarkable reduction of harmful pores. The optimal mass fraction of EVA powder was approximately 4%.
1 January 2025 in Journal of Materials in Civil Engineering
20 May 2026 in Research Square
The size effect of concrete, particularly in reinforced concrete (RC) beams subjected to overlying soil explosions, has yet to be fully clarified. A comprehensive understanding of this effect is crucial for extrapolating results from scale model tests to assess real-world damage in underground structures exposed to such explosions. This research aims to examine the size effect by conducting 17 overlying soil explosion tests on RC beams. The results indicate that the damage patterns, stress-strain behavior and mid-span displacement of RC beams exhibit a pronounced size effect, with smaller specimens exhibiting fewer cracks and reduced deformation. Furthermore, at a consistent scaled distance, the explosive pressure on RC beam surfaces differs due to the soil’s energy absorption properties. In laboratory testing, the scale ratio of RC beams should exceed 1/4 of the actual structure to accurately simulate the effects of overlying soil explosions, and special consideration should be given to the errors in mid-span deflection. Finally, finite element analysis should recalibrate concrete parameters for different sizes to mitigate the size effect.
25 February 2026 in SSRN Electronic Journal
Large-scale underground energy storage technology is being rapidly developed worldwide to address major national strategic needs for renewable energy storage, conversion, and application. A significant concern associated with these structures is the serious safety hazards that could amount from the potential cracking and spalling of cement thermal energy storage structures when operating temperatures reach 400 °C. The incorporation of ethylene vinyl acetate (EVA) as a polymer additive, leveraging its air-entrainment and crack-resistance properties, constitutes a potential solution to this issue. However, the research on the subject remains limited. In this study, the heat-induced damage of EVA mortar was investigated using molecular dynamics (MD) simulations to elucidate the underlying mechanisms. The results demonstrate the synergistic effect of C-S-H and EVA in enhancing energy absorption, leading to improved compressive strength and toughness at high temperatures. Furthermore, a strong correlation exists between compressive strength and ultrasonic pulse velocity (UPV). The formation of gas channels following the gasification and decomposition of EVA helps mitigate capillary pressure, thereby preserving the compressive strength of mortar after thermal treatment. Moreover, the presence of calcium acetate (CA) as a new phase confirms that the carboxyl groups in EVA retard the hydration process of cement. Finally, MD simulations demonstrate that the stable Ca-O ionic and hydrogen bonds at the C-S-H/EVA interface enhance the mechanical properties of C-S-H at high temperatures.
28 April 2026 in SSRN Electronic Journal
Large-scale underground energy storage technology is being rapidly developed worldwide to meet major national strategic needs for renewable energy storage, conversion, and application. A significant concern associated with these cement thermal energy storage structures is the rising potential of cracking and spalling when their operating temperatures reach 400 °C. The incorporation of ethylene vinyl acetate (EVA) as a polymer additive because of its air-entrainment and crack-resistance properties provides a solution to this issue. However, the research on the subject remains limited. In this study, the heat-induced damage of EVA mortar was investigated using molecular dynamics (MD) simulations to elucidate the underlying mechanisms. The results demonstrate the synergistic effect of C-S-H and EVA in enhancing energy absorption, leading to improved compressive strength and toughness at high temperatures. Furthermore, a strong correlation exists between compressive strength and ultrasonic pulse velocity (UPV). The formation of gas channels following the gasification and decomposition of EVA helps mitigate capillary pressure, thereby preserving the compressive strength of mortar under high temperature. Moreover, the presence of calcium acetate (CA) as a new phase confirms that the carboxyl groups in EVA retard the hydration process of cement. Finally, MD simulations demonstrate that the stable Ca-O ionic and hydrogen bonds at the C-S-H/EVA interface enhance the mechanical properties of C-S-H at high temperatures.
8 April 2026 in SSRN Electronic Journal
Large-scale underground energy storage technology is being rapidly developed worldwide to address major national strategic needs for renewable energy storage, conversion, and application. A significant concern associated with these structures is the serious safety hazards that could amount from the potential cracking and spalling of cement thermal energy storage structures when operating temperatures reach 400 °C. The incorporation of ethylene vinyl acetate (EVA) as a polymer additive, leveraging its air-entrainment and crack-resistance properties, constitutes a potential solution to this issue. However, the research on the subject remains limited. In this study, the heat-induced damage of EVA mortar was investigated using molecular dynamics (MD) simulations to elucidate the underlying mechanisms. The results demonstrate the synergistic effect of C-S-H and EVA in enhancing energy absorption, leading to improved compressive strength and toughness at high temperatures. Furthermore, a strong correlation exists between compressive strength and ultrasonic pulse velocity (UPV). The formation of gas channels following the gasification and decomposition of EVA helps mitigate capillary pressure, thereby preserving the compressive strength of mortar under high temperature. Moreover, the presence of calcium acetate (CA) as a new phase confirms that the carboxyl groups in EVA retard the hydration process of cement. Finally, MD simulations demonstrate that the stable Ca-O ionic and hydrogen bonds at the C-S-H/EVA interface enhance the mechanical properties of C-S-H at high temperatures.