Mingjiang Wang

Mingjiang Wang

Auto-generated profile, based on publicly available information

Mingjiang Wang

Western Superconducting Technologies (WST) Company Ltd., Xian, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 February 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MWMingjiang Wang
Mingjiang Wang
QGQiang Guo
Qiang Guo
YZYanmin Zhu
Yanmin Zhu
BWBo Wu
Bo Wu
QWQingYang Wang
QingYang Wang
PZPingxiang Zhang
Pingxiang Zhang
Due to the low cost, high critical current density ( J c ), low anisotropy and a critical temperature of about 40 K, MgB 2 tapes/wires is promising to operate in the High-temperature Superconducting Magnetic Energy Storage (SMES). Based on the development of the world's first 10 MJ/5 MW class High-temperature SMES prototype in China Southern Power Grid, the MgB 2 wires prepared in Western Superconducting Technologies (WST) Co., Ltd is used to wind coils. This paper mainly introduces the preparation progress of MgB 2 wires in WST. The round MgB 2 wires consisted of 30 superconducting filaments and 7 copper filaments is prepared by In-situ PIT (Powder in Tube) technology, the metals (Nb, Cu and CuNi alloys) acted as stable matrix. For batch prepared MgB 2 wires, the length of single one was greater than 2000 m, the MgB 2 fraction of wires was 0.15, the average J c value of wires reached to 3265 A/mm 2 (4.2 K, 3 T). The tensile strength was more than 800 MPa. In addition, the decrement of I c value is less than 2% for the single MgB 2 wire after stranding.

27 May 2019 in Journal of Superconductivity and Novel Magnetism
Verified
Journal Article
Closed access
PDF file
BHBaolei Huo
Baolei Huo
WWWentao T. Wang
Wentao T. Wang
LLLian Liu
Lian Liu
MWMingjiang Wang
Mingjiang Wang
XYXue Yang
Xue Yang
YZYong Zhang
Yong Zhang

14 October 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
WXWei Xie
Wei Xie
QGQiang Guo
Qiang Guo
MWMingjiang Wang
Mingjiang Wang
WYWenlong Yuan
Wenlong Yuan
YZYanming Zhu
Yanming Zhu
PZPingxiang Zhang
Pingxiang Zhang
MgB2 is one of the practical superconductors that has been widely studied over the past two decades. The internal magnesium diffusion (IMD) method serves as a promising method because it can enhance the grain connectivity of MgB2 phase and thereby improve the superconducting current of MgB2 wires. Here, we present the fabrication of 30-filament MgB2 wires using the IMD method. The wires have a diameter of 1.00 mm and length more than 1 km. The filling factor of MgB2 is around 10% and the superconducting current ${{I}_c}$(4.2K, 3T) reaches 650 A. The highest layer-superconducting current density ${{J}_c}$(4.2K, 3T) is 8.9 × 103 A mm−2 and engineering superconducting current density ${{J}_e}$ (4.2K, 3T) is 8.3 × 102 A mm−2. Meanwhile, the percentage of copper in the MgB2 wire is 28% and the residual resistivity ratio RRR(300K/40K) is 60. This can enhance the thermal stability for the low-temperature application. All of these indicate the great potential for the application of our MgB2 wires in the future.

18 December 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
WYWenjiao Yang
Wenjiao Yang
GMGuangtong Ma
Guangtong Ma
MWMingjiang Wang
Mingjiang Wang
ZZZhengwei Zhao
Zhengwei Zhao
BJBaozhu Jia
Baozhu Jia
YXYuanyuan Xu
Yuanyuan Xu
The study of dynamic characteristics is crucial for the future safe applications of HTS maglev systems. Currently, there is limited research on the dynamic characteristics of stack-type HTS maglev systems, particularly regarding the effect of the copper layer within the coated conductor multi-layer structure on vibrational behavior. This paper fills this research gap. The dynamic responses of a stack-type HTS maglev bearing under different time-varying external excitations are calculated with 3 modes (real-scale (HTS-copper) model, real-scale (HTS) model, homogenized model). It is found that under low-frequency external excitations, the induced currents in the copper layer are too small to significantly affect the vibrational response. However, under high-frequency external excitations, the primary effect of the induced currents in the copper layer is to induce phase delay of the dynamic response. Besides, the results from 3 models indicate that the accuracy of the homogenized model decreases as the external excitation frequency increases. In response to different operating conditions, the suitable modeling approaches are proposed from the perspectives of accuracy and computing time consumption.

11 December 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
ZYZhaoying Yan
Zhaoying Yan
ZZZhengwei Zhao
Zhengwei Zhao
FYFan Yang
Fan Yang
MWMingjiang Wang
Mingjiang Wang
WYWenjiao Yang
Wenjiao Yang
YXYuanyuan Xu
Yuanyuan Xu
The quench condition as an extreme operating condition is rarely considered in the mathematical model, but is of great significance to preventing train accidents in advance. In this paper, a closed-loop operational model for the superconducting magnet aboard the vehicle was developed, and comprehensive equivalent circuit equations for the magnetic/rail system were derived, taking into account the magnetic levitation system. The study focused on the current flowing through the superconducting coil and the variations in dynamic magnetic force within the magnetic levitation system during the loss-of-superconductivity process. Secondly, multi-body dynamic mathematical model with 55-degree of freedom (DOF) is established to simulate a more realistic operating condition of the train, and its reliability is validated by SIMPACK/MATLAB co-simulation. Finally, the electro-magnetic interactions with magnet quenched are input into the dynamic model as external disturbances to investigate the vehicle dynamic characteristics of superconducting EDS train. The results indicate that, the quench suspension frame will move laterally and vertically towards the quench side when the SCM is quenched. The lateral displacement speed of the quench magnet is large, and the suspension vehicle will first touch the side wall of the track to cause suspension instability.

5 March 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
QGQiang Guo
Qiang Guo
MWMingjiang Wang
Mingjiang Wang
WYWenlong Yuan
Wenlong Yuan
WXWei Xie
Wei Xie
YZYanmin Zhu
Yanmin Zhu
PZPingxiang Zhang
Pingxiang Zhang
Reducing the AC loss of MgB2 wire is significant for its possible AC engineering applications. In this study, the multi filaments MgB2 wires possessed of various filaments diameter were fabricated via in-situ PIT (Powder in Tube) method. The effects of filaments diameters on the superconducting properties and magnetic hysteresis loss of MgB2 wires were studied systematically. With the filaments diameters decrease from 120 μm to 40 μm, the critical current density (Jc) decreases by 20% (4.2 K, 3 T), the critical transition temperature (Tc) shows a consistent trend, while the magnetic hysteresis losses (Qm) decrease from 1230 mJ/cm3 to 650 mJ/cm3. The above results demonstrate that the smaller filaments diameter is beneficial to reduce the Qm of MgB2 wire, but the attenuation of current capacity can also not be ignored