The paper presents variable speed belt conveyor system where the reference speed is changed in order to achieve improved energy efficiency of operation. The recorded measurements show ...
The main demand for construction of new belt conveyors in open pit mines (OPM) is the increase of safety and system capacity, minimization of personal, reduction of maintenance cost, consumed energy, etc. The paper presents the algorithm for speed control of the system of belt conveyors, in terms of improved system efficiency. The algorithm is based on the principle of optimum utilization of the available material cross section on the belt. The algorithm is developed and tested on the detailed mathematical model of the drive system with the rubber belt, transporting variable capacity of the bulk material, measured at the input of the system. The simulation results are verified through performed measurements of characteristic values, which best illustrates the response of the system to the applied control strategy in the control center of the belt conveyor system with remote control.
During the past two decades, drive and control system of belt conveyors on open pit lignite mines have seen significant advances. The main demand for new construction of belt conveyors was the increase of reliability, unit capacity, minimization of personal, reduction of maintenance cost, increase of safety, reduction of consumed energy, etc. The paper presents detailed mathematical model of the belt conveyor suitable for analyses of both static and transient operating regimes. The model includes electrical drive system of the conveyor, and the mechanical part, with the special attention given to the elastic nature of the belt. Simulation results of the developed model for the drive with frequency converter are presented. Experimental results from the field measurements confirm the validity of the model.
1 December 2019 in International Journal of Electrical Power & Energy Systems