An all-textile metamaterial absorber is proposed for Ku, K and Ka band applications. The proposed metamaterial absorber is based on square-shaped split ring resonators. The design parameters are chosen based on commonly used electronic textile (E-textile) and felt dielectric material. The proposed structure demonstrates has a high absorption property of >90% between 13.1 GHz and 31.13 GHz. At the same time, it reaches 99% absorption value between 16.4 GHz and 21 GHz. The textile metamaterial absorber features the advantages of ultra-wideband operability, angular stability and polarization insensitivity. A proof-of-concept all-textile metamaterial absorber prototype has been fabricated and its simulation performance has been confirmed successfully by measurements. The results obtained are promising for the development of e-textile-based applications such as energy harvesting, camouflage systems, sensitive wearable electronics, health monitoring and electromagnetic shielding.
4 January 2023 in IEEE Transactions on Microwave Theory and Techniques
In this work, for the first time, a 5G/mm-Wave harmonic frequency modulated continuous wave (FMCW) radar with dual Rotman lens-based harmonic millimeter identification (mmID) ranging system is proposed enabling ultralong range highly accurate localization for future localized sensing cyberphysical systems (CPSs). A detailed characterization of the fully-passive harmonic mmID is first presented with an estimated maximum harmonic radar cross section (RCS) of $-$ 35.8 dBsm and a 10 dB beamwidth of $\pm50^\circ$ . The mmID fully overcomes the high-gain beamwidth tradeoff seen in typical high-gain designs enabling robust, ultralong-range detectability. A link budget analysis of the proposed harmonic mmID is presented with the current proof-of-concept (PoC) harmonic radar and with an equivalent isotropic radiated power (EIRP) of 75 dBm reading ranges in excess of 8 km are envisioned. In addition, the system provides a highly accurate ranging at long range with a bounded maximum ranging error of 17 cm up to 46 m from the radar. Furthermore, the 5G/mm-Wave system capitalizes on the highly sensitive phase information for ultrafine 0.4 mm accurate ranging at 10 m. Thus, the proposed system presents a fully-passive, long-range ranging system for future CPSs.
For the first time, the authors propose a 5G/mmWave multilens-based retrodirective backscatter system capable of large coverage in both azimuth and elevation directions. The structure features two biconvex lenses backed by an array of individual backscattering elements (pixels). The components of the system are described in detail, including the cascaded polytetrafluoroethylene (PTFE) lenses and the pixel array. Subsequently, the entire system is assembled, and its detectability and large azimuth/elevation coverage is measured and compared to the state-of-the-art. The millimeter wave identification (mmID) displays a peak differential radar cross section (RCS) of $-$ 15.7 dBsm with a $-$ 10 dB coverage of 2.244 sr about boresight, improving the angular coverage by over 204%, relative to a single-lens-based mmID. A theoretical link budget analysis is presented for the best-and worst case incidence angles. Using the maximum allotted 75 dBm equivalent isotropic radiated power (EIRP) in 5G/mmWave frequencies, reading ranges of 5.88 and 3.35 km are envisioned with incidence angles of 0 $^\circ$ and 50 $^\circ$ , respectively. To demonstrate its long-range potential for localized sensing applications, a proof-of-concept (PoC) frequency modulated continuous wave (FMCW) radar is used to range the multi-lens mmID up to 82.5 m within 6 cm of the true range even at the worst case incidence angle. This approach could potentially unlock the deployment of dense battery-less 5G-connected localizable mmID the Internet-of-Things (IoT) swarms in “Smart” digital twinning applications.
10 October 2024 in IEEE Journal of Radio Frequency Identification
The rise and progression of the Internet of Things (IoT) have reshaped how devices connect and share information, leading to more intelligent and interconnected settings. In this realm, the incorporation of self-sustaining millimeter-wave Identification (mmID) devices present a compelling opportunity to elevate IoT implementations, especially concerning accurate positioning and monitoring capabilities. In this work, the authors introduce a novel lens-enabled passive mmID tailored for highly accurate localization and precise 2-axis orientation detection. Equipped with a frequency diverse pixel antenna array and integrated with a low-loss 3D lens for improved performance, the mmID demonstrates a peak monostatic RCS of -29.2 dBsm with a -10angular coverage of ±55 °across all cuts, translating to a solid angle coverage of 2.679sr about boresight. A theoretical link budget analysis is provided for the lens-based mmID, projecting a maximum reading range of 868when utilizing the maximum allotted 75 dBm EIRP for 5G/mmWave frequencies. Employing a proof-of-concept (PoC) reader with 30 dBm EIRP, the proposed system demonstrates highly accurate localization, with a mean error of <2cm at distances up to 45 m, and utilizes sensitive phase information to achieve an average phase-based ranging error within 1across distances up to 20 m. Additionally, a novel signal processing methodology employing multi-output Classification Convolutional Neural Networks (CNN) is introduced to accurately discern the 2-axis orientation of the mmID, resulting in a mean error of <5°at ranges up to 30m. By offering superior precision and versatility, the passive mmID solution emerges as a promising advancement for next-generation 5G/mmWave Cyber-Physical Systems (CPS) and IoT applications.
1 February 2022 in IEEE Transactions on Microwave Theory and Techniques
In this effort, we present a fully energy autonomous two-way repeater system for use in nonline-of-sight (NLOS) interrogation of wireless sensor networks. The proposed system is based on a pair of tunnel diode reflection amplifiers, taking advantage of the existence of a negative differential resistance region that exists when the device is biased at a low voltage in the quantum tunneling region. This enables the development of an ultralow-cost, ultralow-power means to provide amplification. The proposed system demonstrates an ability to extend the total read range of semipassive radio frequency identification (RFID) tags by 4.55 times while consuming over 1000 times less power than comparable technologies, a notable improvement on previously published work. The system shows an ability to be customized to fit a wide array of different applications where NLOS interrogation and the read range of semipassive RFID tags pose a challenge.