This study aims at developing an improvement framework of warehouse processes by improving process cycle efficiency using lean six sigma (DMAIC) approach.
28 April 2021 in Journal of Industrial Engineering and Management
Purpose: This study aimed at implementing lean six sigma to evaluate the productivity and manufacturing waste in the production line of a paper companyMethodology/Approach: The study is a case study in nature. The method illustrates how lean six sigma (LSS) is used to evaluate the existing production process in a paper production company with focus on productivity and manufacturing waste. The study considered a real-time problem of customer’s dissatisfaction. The gathered data is based on machine functionality (up time, down time and cycle time); materials and labour flow at every process stages of the production line. The optimization of the production process was based on lean tools like value stream mapping, process cycle efficiency, Kaizen, 5S and pareto chartFindings: Based on lean six sigma application, it was discovered that the present production performance was below standard and more manufacturing wastes were generated. The present productivity and manufacturing wastes are reported as low process cycle efficiency (23.4 %), low takt time (4.11 sec), high lead time (43200sec), high number of products not conforming to six sigma values, high down time (32.64 %) and excess labour flow (33). After the implementation of the lean six sigma tools for certain period of time, there are lots of improvements in the production line in terms of all the parameters considered.Research Limitation/ Implications: The study has demonstrated an application of lean six sigma in the case of solving real-time problems of productivity and manufacturing wastes which have a direct implication on customer’s satisfaction. The lesson learned and implications presented can still be further modeled using some lean based software for validityOriginality/Value: The study has contributed to the body of knowledge in the field of LSS with focus to process based manufacturing, unlike most literature in the field concentrate more on discrete based manufacturing.
Mechanical properties (impact, hardness and tensile strength) characterization of samples containing homogenous mixtures of Al 6063 matrix and varying amount of silver nanoparticles mixed with calcium carbonate at 2, 4, 6% weight fractions, respectively, produced by method of stir casting were carried out. Measurement of impact energy, hardness and tensile strength of the produced samples at 24℃ (ambient) temperature was done by Charpy impact, Brinell hardness and universal tensile testing machine in accordance to ASTM E23, E384 and E8/E8M-13M, respectively. The magnitude of impact and hardness increased evidently with increase in percentage weight fraction of the AgNPs. The refined samples were examined under an optical microscope. The fracture surfaces of the impact test samples were further examined by scanning electron microscopy. There is an increase in tensile strength, elongation and modulus of elasticity of Al-AgNP composites compared to as-cast aluminium alloy. The use of stir-casting technique influences the homogeneity and microstructure of the composites positively. It is concluded that Al-silver nanocomposites possess better qualities in hardness and strength and can replace conventional aluminium alloy in terms of performance and longer life in industrial application.
The use of classic and advance controls to minimize unwanted motions and vibrations in the railcar system is aimed at significant reduction in the vehicle body acceleration and suspension travel with increased rail holding ability. This study employs the use of the Fuzzy-PID control system for the control of the rail car suspension system. The modelling and intelligent control of the suspension system was done using the Fuzzy-logic PID system and simulated in the MATLAB 2018b environment. The equations of motion was generated from the free body diagram of the railcar suspension system and the overall equation was used an input into the Fuzzy-PID control system. The optimal gains of the PID was first obtained followed by the subsequent design of the Fuzzy-logic control with tuning abilities for the PID. Compared to other control systems employed, the results obtained showed that the Fuzzy-logic control system possesses significant control ability in ensuring the system recovers quickly from the any offset from the normal position triggered by the disturbances with minimal acceleration, vibration and displacement.
Adaption to evolving learning and teaching strategies is inevitable for both learners and instructors. This is due to the diversity in the background of both the learners and the instructors. The evolution comes with its own challenges such as consideration of different learning styles. The purpose of this study is to explore the different learning styles of students and investigate the diversity in teaching techniques to enhance the learning, motivation, engagement, and success of all students. A systematic literature review method was used to collect data from the reviewed articles. Different models, frameworks and approaches are utilised to ensure maximum and successful learning from all the students. A detailed study of the frameworks and approaches that are used to address the different learning styles is explored. The actual learning styles and pedagogy emanating from this study indicated a solid awareness and consideration of diverse learning styles of learners. The results also indicate that various teaching strategies employed accommodate learners’ diversity in the engineering education. The blended learning approach accounted for 48% of the articles reviewed followed by the game based learning (28%) while the project based learning accounted for 24%. This may improve teaching and improve learners approach to learning. The findings of this study can serve as a guide and encouragement for teachers to take the lead and incorporate new technologies and new pedagogics in their teaching styles.