The implementation of measures and activities aimed at preserving the environment is preceded by the categorization of products created by the application of technological processes. The emission of harmful substances within the limit prescribed values is defined by the valid legislation of the Republic of Serbia. The development of project documentation for the disposal of ash, slag and gypsum from the technological process of flue gas desulphurization (FGD) must be based on the application of modern technologies in order to preserve the surrounding ecosystem. The planning of the landfill space for the accommodation of combustion and desulfurization products requires the analysis of all input parameters of the technological process of electricity production. The use of ash, slag and gypsum as products of the production process of thermal power plants is not adequately accepted in the domestic industry. The role of new technologies should be directed towards the greatest possible utilization of stored products in order to produce new products, thus preserving mineral resources and protecting the conditions of the living environment.
24 June 2026 in Recycling and Sustainable Development
One of the most common methods for transporting large quantities of solid bulk cargo is by ship. This mode of transport involves certain risks because the cargo is loaded in bulk, without additional packaging. As a result, it can become further moistened by atmospheric precipitation, since ships are generally not covered. Moisture in the cargo is the most significant risk factor leading to liquefaction. Excessive moisture content in the cargo can cause liquefaction, which may result in the cargo shifting to one side of the ship, compromising the stability of the ship and in the worst case, causing it to capsize. One of the most important safety measures for this mode of transport is controlling the permissible moisture limit (TML). By reducing the initial moisture content in the bulk cargo before loading - through drying or proper storage - the risk of liquefaction can be minimized or prevented. In this paper, the critical (FMP) and permissible (TML) moisture content in a sample of fine-grained copper concentrate from Bor was determined using a standard method to ensure safe transport of bulk cargo by ship. Test results for a copper concentrate sample, with an initial moisture content of 11.49%, show that with the standard addition of water in increments of 0.4% to 0.5% per cycle, the obtained TML values are above the initial moisture content. The concentrate is suitable for transport by ship with appropriate precautions.