29 January 2025 in IEEE Transactions on Geoscience and Remote Sensing
Accurate monitoring of ground subsidence caused by underground coal mining is crucial for environmental protection. This article proposes a correction method for coal mining subsidence, termed Subsidence Correction based on Horizontal Displacement (SCHD), utilizing UAV LiDAR technology. This method leverages the strengths of image sub-pixel correlation technology in obtaining high-precision horizontal displacement information while addressing the limitations of the traditional Digital Elevation Model differential (DoD) method, which often yields incomplete and inaccurate deformation data. Through simulation experiments and field verifications, we quantitatively analyze the effects of surface slope, the angle between the aspect and the horizontal displacement vector, and the magnitude of horizontal displacement on subsidence modeling accuracy. We validate the reliability of the MicMac image sub-pixel correlation technique for extracting horizontal displacement information from the ground surface before and after coal mining, and we correct the subsidence errors introduced by neglecting horizontal displacement using the proposed SCHD method. The results indicate that overlooking horizontal displacement can lead to significant overestimations or underestimations of vertical deformation, with error magnitude closely related to the aforementioned topographic parameters and displacement characteristics. The high-precision horizontal displacement information obtained through the image sub-pixel correlation technique meets subsidence monitoring requirements. The SCHD method effectively reduces subsidence modeling errors and improves monitoring accuracy by 15.6% to 40%, achieving centimeter-level precision. This study underscores the significant impact of horizontal displacement on monitoring coal mining subsidence, demonstrating that the SCHD method enhances the accuracy of such monitoring and provides a robust technical approach for extracting detailed three-dimensional deformation information from mining area surfaces.
6 October 2025 in IEEE Sensors Journal
Digital Elevation Models (DEMs) play a vital role in terrain analysis, disaster warning, and environmental monitoring. However, existing ground point extraction methods from point clouds often suffer from high misclassification rates in complex geomorphological settings, significantly compromising DEM accuracy—especially in regions like the Chinese Loess Plateau. To effectively tackle this challenge, we introduce Seed Point-guided Adaptive Ground Misclassification Detection and Correction (SPAG-DC), a novel method based on Airborne Laser Scanning (ALS) sensor data. SPAG-DC employs dynamic region growing to extract a reliable ground point core, uses elevation gradients to adaptively construct grids for initial seed points, and introduces a consistency set algorithm to purify these seed points by removing non-ground artifacts. High-quality seed points then guide terrain surface fitting using Thin-Plate Splines (TPS), enabling accurate detection and correction of misclassified points based on distance thresholds. Experiments were conducted based on the existing classical and Deep Learning (DL) based filtering methods, with evaluations performed across four dimensions: class II error rate, internal and external conformity, and reference DEM deviation. To further evaluate the generalization ability of the proposed algorithm, the open-source dataset OpenGF was employed for comparative experiments. Results show that SPAG-DC effectively reduces misclassifications, with most elevation deviations between the generated DEMs and ground truth falling within ±0.1 m across multiple test areas. The method demonstrates strong spatial consistency and robustness in DEM modeling. Overall, SPAG-DC offers an effective and reliable solution for generating high-precision DEMs in the challenging topography of the Loess Plateau.