1 January 2019 in Proceedings of the Combustion Institute
1 March 2014 in Applied Energy
1 December 2016 in Renewable Energy
4 February 2020 in Journal of Engineering for Gas Turbines and Power
In this study, two Inconel 625 swirl nozzle inserts with identical bulk geometry were constructed via additive layer manufacturing (ALM) for use in a generic gas turbine swirl burner. Further postprocessing by grit blasting of one swirl nozzle insert results in a quantifiable change to the surface roughness characteristics when compared with the unprocessed ALM swirl nozzle insert or a third nozzle insert which has been manufactured using traditional machining methods. An evaluation of the influence of variable surface roughness effects from these swirl nozzle inserts is therefore performed under preheated isothermal and combustion conditions for premixed methane-air flames at thermal power of 25 kW. High-speed velocimetry at the swirler exit under isothermal conditions gives evidence of the change in near-wall boundary layer thickness and turbulent fluctuations resulting from the change in nozzle surface roughness. Under atmospheric combustion conditions, this influence is further quantified using a combination of dynamic pressure, high-speed OH* chemiluminescence, and exhaust gas emissions measurements to evaluate the flame stabilization mechanisms at the lean blowoff and rich stability limits. Notable differences in flame stabilization are evident as the surface roughness is varied, and changes in rich stability limit were investigated in relation to changes in the near-wall turbulence intensity. Results show that precise control of in-process or postprocess surface roughness of wetted surfaces can positively influence burner stability limits and NOx emissions and must, therefore, be carefully considered in the ALM burner design process as well as computational fluid dynamics (CFD) models.
1 May 2003 in The International Journal of Human Resource Management
This article draws on our four case studies to examine the nature of the relationships between ABB and its Canadian subsidiaries. Starting from a critical review of the literature, it develops a framework that is sensitive to three levels of analysis: the factors that shape the parent corporation's strategies, the characteristics of the host countries in which the MNC operates and the characteristics of the local subsidiaries themselves. The empirical material illustrates how innovation is generated by a two-way process, in which the initiative of corporate leaders challenges the ‘interpretation’ of local actors. In doing so, we point to a number of key omissions in the influential attempt by Bartlett and Ghoshal to use ABB to develop a managerial theory of the firm. This research also leads to broader considerations regarding the interface between markets and organizations. As distinct from the orthodox view, a transnational corporation may be conceived as a mediator between the market and a local subsidiary. In many ways, the global corporation channels and mediates the impact of external market forces on internal organizational actors, through a process involving the exercise of politics and power. The article has significant implications for decision making on human resource management. In particular it stresses that local managers, local unions, and employees can think and act strategically only in as far as they properly assess the limits of their respective sphere of organizational autonomy within the corporation.
1 May 2013 in Applied Thermal Engineering