7 June 2012 in International Journal on Interactive Design and Manufacturing (IJIDeM)
11 February 2023 in The International Journal of Advanced Manufacturing Technology
The traditional tools used in steam-chest moulding technologies for the shaping of expanded polymers can be replaced today by lighter moulds, accurately designed and produced exploiting the additive manufacturing technology. New paradigms have to be considered for mould design, assuming that additive manufacturing enables the definition of different architectures that are able to improve the performance of the moulding process. This work describes the strategies adopted for the design and manufacturing by Laser powder bed fusion of the moulds, taking into specific consideration their functional surfaces, which rule the heat transfer to the moulded material, hence the quality of the products and the overall performance of the steam-chest process. The description of a case study and the comparison between the performance of the traditional solution and the new moulds are also presented to demonstrate the effectiveness of the new approach. This study demonstrates that the re-design and optimization of the mould shape can lead to a significant reduction of the energy demand of the process, thanks to a homogeneous delivery of the heating steam throughout the part volume, which also results in a remarkable cutting of the cycle time.
18 February 2022 in IEEE Open Journal of Engineering in Medicine and Biology
Goal: To provide a Multiple Emergency Ventilator (MEV) as backup in case of shortage of ICU ventilators and for use in camp hospitals. Methods: MEV provides the same oxygen mixture and peak inspiratory pressure (PIP) to 10 patients. These specifications were fixed: i) gas supply and plugs to double-limb intubation sets compatible to existing systems; ii) fluid-dynamics with no pressure drop and almost complete patients’ uncoupling; iii) individual monitoring of inspiratory and expiratory pressures and flows and control of their timing; iv) easy stocking, transport, installation with self-supporting pipes. Results: A Bell-Jar System (BJS) design permitted to safely fix PIP based on Archimedes’ law. The main distribution line was based on 2” stainless steel pipes assuring the required mechanical properties and over-dimensioned for fluidics. The Windkessel of the BJS and pipeline dead-volumes is 75.65 L and in the worst case of the instantaneous demand of 5 L by 10 patients (0.5 L each) shows an adiabatic PIP drop limited to –6.18%, confirming the needed uncoupling. Consequently, patients’ asynchrony is permitted as needed by pressure-controlled volume-guaranteed and assisted-ventilation. Conclusions: Although MEV is proposed as a backup system, its features may cover the whole set of ventilation modes required by ICU ventilation.
1 January 2011 in International Journal of Virtual Reality
To reduce the number of road accident victims the European Commission has encouraged the European member states to implement a series of actions in this field. These actions include the development of intelligent and integrated safety systems as well as educational and training initiatives. Educational initiatives include the training of the drivers to improve their ability and sense of responsibility. In addition to the direct use of the vehicle, the training includes the recognition of the traffic signs. Since the recognition may be influenced by both the position of the signal and the weather conditions, the authors have studied the possibility of evaluate the drivers' perception of road signs by means of a virtual environment tool able to perform different operative conditions. A series of tests was conducted to evaluate the visualization tool created and its ability to replace other recognition tests. This paper reports first tests results.
6 March 2015 in International Journal on Interactive Design and Manufacturing (IJIDeM)
24 July 2025 in Progress in Additive Manufacturing