Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-alloy (mass %) during isothermal aging are conducted. In the experiments, two hardening phases are identified: the tetragonal θ′ (Al2Cu) phase and the hexagonal T1 (Al2CuLi) phase. Both are plate shaped and of nm size. They are analyzed with respect to the development of their size, number density and volume fraction during aging by applying different analysis techniques in TEM in combination with quantitative microstructural analysis. 3D phase-field simulations of formation and growth of θ′ phase are performed in which the full interfacial, chemical and elastic energy contributions are taken into account. 2D simulations of T1 phase are also investigated using multi-component diffusion without elasticity. This is a first step toward a complex phase-field study of T1 phase in the ternary alloy. The comparison between experimental and simulated data shows similar trends. The still unsaturated volume fraction indicates that the precipitates are in the growth stage and that the coarsening/ripening stage has not yet been reached.
1 December 2018 in Computational Materials Science
In-situ TEM investigation of aging response in an Al–7.8 at.% Li was performed at 200 °C up to 13 hours. Semi-spherical δ′ precipitates growing up to an average radius of 7.5 nm were observed. The size and number of individual precipitates were recorded over time and compared to large-scale phase-field simulations without and with a chemo-mechanical coupling effect, that is, concentration dependence of the elastic constants of the matrix solid solution phase. This type of coupling was recently reported in theoretical studies leading to an inverse ripening process where smaller precipitates grew at the expense of larger ones. Considering this chemo-mechanical coupling effect, the temporal evolution of number density, average radius, and size distribution of the precipitates observed in the in-situ experiment were explained. The results indicate that the mechanism of inverse ripening can be active in this case. Formation of dislocations and precipitate-free zones are discussed as possible disturbances to the chemo-mechanical coupling effect and consequent inverse ripening process.