Tiago de Oliveira Tavares

Tiago de Oliveira Tavares

Auto-generated profile, based on publicly available information

Tiago de Oliveira Tavares

Universidade Estadual Paulista, Brazil

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2016 in Revista Caatinga
Verified
Journal Article
Open access
PDF file
FSFelipe Santinato
Felipe Santinato
Rouverson Pereira da SilvaRouverson Pereira da Silva
Rouverson Pereira da Silva
VSVantuir DE Albuquerque Silva
Vantuir DE Albuquerque Silva
CSCarlos Diego DA Silva
Carlos Diego DA Silva
TTTiago DE Oliveira Tavares
Tiago DE Oliveira Tavares
Brazilian coffee farming is carried out both on flat and steep lands. In flat areas, mechanized operations are intensive; however, in steep slope areas, certain mechanized operations cannot be performed, such as harvesting. Based on this, the industry has developed machinery to harvest coffee in areas with up to 30% slope. However, harvesters have their efficiency and operational performance influenced by land slope. Thus, this study aimed to evaluate the operational performance and harvesting efficiency of a steep -slope harvester under different situations, using different speed settings. The experiment was carried out in the county of Santo Antônio do Amparo, state of Minas Gerais, Brazil, using five coffee stands with 10, 15, 20, 25 and 30% slope. Evaluations were performed with a self-propelled harvester (Electron, TDI(r), Araguari, MG, Brazil) at three rotation speeds (600, 800 and 1.000 rpm) and two ground speeds (800 and 1.000 m h -1). The results showed the lower speed (800 m h-1) was suitable for 10% slope areas since the amount of fallen coffee berries. For areas of 20% slope, harvesting time was 21.6% longer than in flatter areas. Downtime varied from 10.66 to 29.18% total harvest due to a higher number of maneuvers.

1 October 2017 in Revista Brasileira de Engenharia Agrícola E Ambiental
Verified
Journal Article
Open access
PDF file
Adão Felipe dos SantosAdão Felipe dos Santos
Adão Felipe dos Santos
Rouverson Pereira da SilvaRouverson Pereira da Silva
Rouverson Pereira da Silva
TTTiago O. Tavares
Tiago O. Tavares
AOAntonio T. S. Ormond
Antonio T. S. Ormond
DRDavid Rosalen
David Rosalen
LALeonardo Campos de Assis
Leonardo Campos de Assis
GNSS positioning errors are certain, regardless of the adopted positioning method. In agriculture, these errors may represent higher or lower overlapping rates between passes of a mechanical assembly, affecting operation quality. Therefore, this study evaluated the main errors arising from peanut sowing operation performed with an auto-steer guidance system by an RTX signal, using the Statistical Process Control techniques. The errors evaluated were: in tractor lateral displacement, project execution, and parallelism between passes of tractor-seeder set. The average errors of project execution in all passes were within the range specified by the manufacturer, i.e. lower than 3.8 cm. The average error of tractor-seeder set was also within the accepted range. However, as shown in control charts, lateral tractor displacement had interference of terrain slope, causing average errors higher than the accepted range. Based on the control charts, project execution accuracy was satisfactory, and it is possible to use the RTX signal in agricultural operations that require accuracy lower than 3.8 cm, such as peanut sowing.

1 December 2015 in Engenharia Agrícola
Verified
Journal Article
Open access
PDF file
MVMurilo Aparecido Voltarelli
Murilo Aparecido Voltarelli
Rouverson Pereira da SilvaRouverson Pereira da Silva
Rouverson Pereira da Silva
CZCristiano Zerbato
Cristiano Zerbato
CPCarla S. S. Paixão
Carla S. S. Paixão
TTTiago de O. Tavares
Tiago de O. Tavares
Statistical process control in mechanized farming is a new way to assess operation quality. In this sense, we aimed to compare three statistical process control tools applied to losses in sugarcane mechanical harvesting to determine the best control chart template for this quality indicator. Losses were daily monitored in farms located within Triângulo Mineiro region, in Minas Gerais state, Brazil. They were carried over a period of 70 days in the 2014 harvest. At the end of the evaluation period, 194 samples were collected in total for each type of loss. The control charts used were individual values chart, moving average and exponentially weighted moving average. The quality indicators assessed during sugarcane harvest were the following loss types: full grinding wheel, stumps, fixed piece, whole cane, chips, loose piece and total losses. The control chart of individual values is the best option for monitoring losses in sugarcane mechanical harvesting, as it is of easier result interpretation, in comparison to the others.

1 August 2019 in Revista Brasileira de Engenharia Agrícola E Ambiental
Verified
Journal Article
Open access
CZCristiano Zerbato
Cristiano Zerbato
CFCarlos Eduardo Angeli Furlani
Carlos Eduardo Angeli Furlani
MOMailson F. de Oliveira
Mailson F. de Oliveira
MVMurilo Aparecido Voltarelli
Murilo Aparecido Voltarelli
TTTiago de O. Tavares
Tiago de O. Tavares
FCFranciele Morlin Carneiro
Franciele Morlin Carneiro
Over the past decade, automatic guidance of agricultural machinery via Global Navigation Satellite System (GNSS) signals has been increasingly adopted by the farming community. Peanut farmers are adopting such technology in order to improve the parallelism of operations to address difficulties that occur in mechanical digging, where losses are a big problem. This study aimed to evaluate mechanized operations of peanut sowing and digging controlled manually and by autopilot, along with their quality. The treatments consisted of two digging operations, with and without autopilot, and two displacement speeds (4.5 and 6.0 km h-1). The experiment was conducted in a medium-textured soil in a completely randomized design arranged in bands, using the analyzed variables as quality indicators. At sowing, parallelism between passes of the tractor-sower set, was evaluated at 120 points of each system (manual and automatic routing). The digging losses were evaluated in the two guidance systems, under two displacement speeds (4.5 to 6.0 km h-1) at 15 points per treatment. It was verified that the parallelism between the passes of the tractor-sower set was better when using the autopilot, which improved the operation quality. Displacement speed did not influence the digging loss. There were no differences in the visible digging loss, but higher quality was obtained when the operation was performed using autopilot. Minor invisible and total digging losses were obtained when the digging was performed with automatic routing, and superior quality was found at a speed of 4.5 km h-1; however, quality was adversely affected under manual operation. Thus, the use of autopilot is effective for improving the accuracy and the quality of the operations.

1 September 2018 in Agronomy Journal
Verified
Journal Article
Open access
PDF file
TTTiago de Oliveira Tavares
Tiago de Oliveira Tavares
MBMatheus Anaan de Paula Borba
Matheus Anaan de Paula Borba
BOBruno Rocca de Oliveira
Bruno Rocca de Oliveira
Rouverson Pereira da SilvaRouverson Pereira da Silva
Rouverson Pereira da Silva
MVMurilo Aparecido Voltarelli
Murilo Aparecido Voltarelli
AOAntônio Tassio Santana Ormond
Antônio Tassio Santana Ormond
Core Ideas: The harvest performance can be affected by plant phenological behavior, non‐uniform fruit ripening, late harvest, pests and diseases, rods vibration intensity, displacement velocity and, finally, slope. After harvesting, the approximately 10–20% of coffee cherries that fall on the ground are known as the sweeping coffee and require a gathering operation. The mechanical sweeping and gathering allow higher operational capacity (working greater areas in shorter times), thus increasing profitability and reducing operational costs, however, these machines are sensitive to oscillation and/or soil topography. In addition to this limiting factor, one of the main obstacles to mechanical picking of sweeping coffee is the subsoiling operation that consists of unpacking the soil by moving the soil surface of the coffee interlines, where the coffee berries are to be harvested later . In this context, assuming that the subsoiling operation could affect the losses during the mechanical picking of sweeping coffee, this study aimed at using the SPC tools to monitor the ability of management processes to reduce losses in the sweeping and mechanical picking of fallen coffee for four soil managements. The mechanical sweeping and picking of coffee berries are necessary to recover berries that naturally fall on the soil during the mechanical harvesting process. The soil characteristics and the materials that are collected affect these two operations; in addition, there are reports that suggest that mechanical sweeping and picking are hampered by subsoiling. In this regard, the current study evaluated losses during the mechanical sweeping and picking of coffee cultivated under four soil management treatments in Presidente Olegário, MG, Brazil. The four treatments consisted of the following soil management practices: subsoiling and crushing; subsoiling and harrowing; subsoiling followed by harrowing and crushing; and the control, with no soil management. The soil was prepared in 2014, while the coffee sweeping and picking occurred in 2015 and 2016. The experimental design followed the assumptions of statistical process control, and fifteen points were evaluated per treatment in accordance with the statistical process control guidelines. The lowest loss rates were obtained for the subsoiling and crushing soil management treatment, whereas harrowing after subsoiling led to the highest losses and the lowest process quality.

1 December 2016 in African Journal of Agricultural Research
Verified
Journal Article
Open access
PDF file
DTde Oliveira Tavares Tiago
de Oliveira Tavares Tiago
PRPereira da Silva Rouverson
Pereira da Silva Rouverson
SFSantinato Felipe
Santinato Felipe
Adão Felipe dos SantosAdão Felipe dos Santos
Adão Felipe dos Santos
SCStrini Segatto Paixao Carla
Strini Segatto Paixao Carla
DVde Albuquerque Silva Vantuir
de Albuquerque Silva Vantuir
The coffee mechanized picking is an essential operation in modern coffee crop, however, is still an activity with few studies that emphasize the factors that could interfere in its operational performance. Assuming that the slope of the land can be one of these factors, it aimed to evaluate operational performance of a mechanized set of coffee picking in different terrain slopes. The treatments consisted of coffee mechanized picking in four slope lanes (0.0 to 5.0%, 5.1 to 10.0%, 10.1 to 15.0 and 15.1% to 20.0%) distributed in experimental design in lanes with three replications. The evaluation of the operational performance was materialized by means of timing and movements’ analysis, collecting up time in operation, unloading and maneuvering, as well as efficiencies analysis of picking and cleaning. The operation was performed in crop with 1.133 kg of coconut coffee ha-1 to be picked. The slope of the land, from 15.1%, interferes in the performance of the harvester, significantly reducing the effective and operational field capacity. Slopes of up to 20% do not harm the cleaning efficiency; on the other hand, for picking efficiency, slopes higher than 15% significantly reduce the performance of the machines. Key words: Coffea arabica L., land slope, mechanical harvesting, machine performance, harvesting loses.