28 July 2026 in SSRN Electronic Journal
This study reports the development of multifunctional silica aerogel-based composites designed to balance ultralow thermal conductivity, enhanced mechanical robustness, and surface electrical conductivity for advanced aerospace applications. Silica aerogel panels were fabricated via an optimized molding process using a latex-based binder system. The resulting composites achieved a density of 0.171 g/cm³ and maintained super-insulating performance with a thermal conductivity (λ) of 0.0160 W/m·K, effectively preventing thermal bridging by restricting binder infiltration to the interstitial voids between aerogel particles. Mechanical characterization revealed a significant improvement in structural integrity over monolithic aerogels, with a Young’s modulus of 2.1 ± 0.1 MPa and a compressive stress at 10% deformation of 123 ± 6 kPa. To impart electrical functionality for the mitigation of electrostatic charges, a reduced graphene oxide (rGO) coating was developed via a one-step hydrothermal synthesis and deposited using a spray-coating technique. The nature of the dopants used in the rGO synthesis significantly influenced the final properties, with rGO-Fe providing the highest electrical conductivity (1.07 ± 0.22 S/cm) and rGO-Mg/Na exhibiting the highest hydrophobicity (contact angles up to 126.3°). Although the graphene coatings slightly increased the thermal conductivity (e.g., 0.0208 W/m·K for rGO-Mg), the composites remained highly efficient insulators. The developed multifunctional materials offer a lightweight solution that integrates thermal protection with essential electrical and mechanical properties.