13 June 2023 in Advances in Civil Engineering
The prediction of reservoir bank collapse width is a unique problem encountered in the construction of hydropower projects. Existing empirical graphic methods are based on the final state of bank collapse and can be used to predict only bank collapse width, and they thus do not adequately reflect the characteristics of the bank collapse process. To solve this problem, a prediction model for bank collapse width based on the limit equilibrium theory was established, and the key parameters and bank collapse process of the model were analyzed. The results reveal the necessity of selecting a reasonable underwater accumulation rate when predicting the bank collapse width using the limit equilibrium theory. At a constant ratio of water depth to bank slope height, the underwater accumulation rate increases with increasing bank slope height, with a linear relationship between them. In contrast, the bank slope angle has little impact on bank collapse width. Specifically, it mainly affects the width of the first bank collapse but has little effect on the width of subsequent bank collapses. With an increase in the bank slope angle, the bank collapse width fluctuates and rises. The prediction model of bank collapse width based on the limit equilibrium theory can better explain the time-dependent behavior of bank collapse. The research results are of high significance for the prediction of loess bank collapse.
1 September 2026 in Journal of Renewable and Sustainable Energy
This paper presents a calculation method for the limit burial depth of compressed air energy storage (CAES) lined caverns incorporating load-sharing effects. A mechanical model based on three-layer thick-walled cylinder theory is established to analyze stress distribution and load-sharing ratios among the steel layer, concrete lining, and surrounding rock. Combined with the rigid conical limit equilibrium model, a formula for limit burial depth is derived. Parametric analysis investigates the influence of cavern radius, steel and concrete lining thicknesses, concrete strength, maximum storage pressure, rock mass grade, and in situ stress on burial depth. Results indicate that the surrounding rock bears the predominant load (approximately 75% on average), followed by the concrete lining (approximately 20% on average) and steel layer (approximately 5% on average). Cavern radius, concrete lining thickness, and rock mass quality significantly affect load distribution, while cavern radius, rock grade, and in situ stress critically influence burial depth. These findings provide practical guidance for the optimal design of CAES lined caverns.