Energy and conversion efficiencies of the carbon dioxide (CO 2 ) dissociation process at atmospheric-pressure conditions are investigated using a direct-coupled continuous microwave plasma system (MPS). Gas chromatography and mass spectrometer measurements were performed on the gas mixture postplasma treatment, over a range of specific energy inputs (SEIs) (0.06–0.6 eV mol $^{-1})$ , in order to determine species mass fractions of CO 2 , carbon monoxide, and oxygen. In this region of SEI, energy efficiency is maximized at the cost of conversion efficiency. The corresponding maximum observed quantities for conversion efficiency and energy conversion efficiency (ECE) occurred at conditions close to the end of the test range and are, respectively, 9% and 0.0048 L min $^{-1}\text{W}^{-1}$ . The maximum throughput of CO 2 converted was 0.59 L min $^{-1}$ , at an SEI of 0.1 eV mol $^{-1}$ and an ECE of 0.004 L min $^{-1}\text{W}^{-1}$ . Optical emission spectroscopy was used to approximate the rotational and vibrational temperatures of the plasma system to be in the range of 7000–8000 K. This paper suggests that an MPS is the most energy efficient method in dissociating CO 2 under atmospheric pressure and, therefore, most suitable to be used in a CO 2 recycling setup, which can further increase conversion rates.
1 January 2019 in Proceedings of the Combustion Institute
The effect of continuous volumetric direct-coupled nonequilibrium atmospheric microwave plasma discharge on swirl-stabilized premixed methane–air flames was investigated using quantitative OH planar laser-induced fluorescence and spectrally resolved emission. The plasma discharge was found to influence the dynamics of flame stabilization, i.e., plasma-assisted flames stabilized in the quiescent center body wake were relatively stable while swirl flames stabilized in the active inner shear layer were prone to local extinction due to aerodynamic shear. At coupled plasma powers corresponding to less than 3% of the thermal power output, in addition to the improved flame stability, significant improvement in the lean blow-out limit ( $\sim 43$ %) and OH number density ( $\sim 150$ %) was observed. The enhancements are shown to be nonequilibrium plasma effects and not predominantly ohmic heating as significant equivalence ratio dependence of OH number density in plasma-assisted flames was observed. Spectrographic measurements indicated nitrogen vibrational temperatures as high as 6100 K, suggesting both vibrational and electronic excitation of nitrogen molecules in the presence of a plasma discharge. The activation of highly reactive species through vibrational–vibrational relaxation and direct impact dissociation accelerates the combustion chemistry. It is demonstrated that microwave direct plasma coupling can drastically enhance the dynamic flame stability of swirl-stabilized flames, especially at very lean operating conditions.