Masoud Pashaeifar

Masoud Pashaeifar

Auto-generated profile, based on publicly available information

Masoud Pashaeifar

Department of Microelectronics, Delft University of Technology, Delft, CD, The Netherlands

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2018 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
MPMasoud Pashaeifar
Masoud Pashaeifar
MKMehdi Kamal
Mehdi Kamal
AAAli Afzali-Kusha
Ali Afzali-Kusha
MPMassoud Pedram
Massoud Pedram
In this paper, a reverse carry propagate adder (RCPA) is presented. In the RCPA structure, the carry signal propagates in a counter-flow manner from the most significant bit to the least significant bit; hence, the carry input signal has higher significance than the output carry. This method of carry propagation leads to higher stability in the presence of delay variations. Three implementations of the reverse carry propagate full-adder (RCPFA) cell with different delay, power, energy, and accuracy levels are introduced. The proposed structure may be combined with an exact (forward) carry adder to form hybrid adders with tunable levels of accuracy. The design parameters of the proposed RCPA implementations and some hybrid adders realized utilizing these structures are studied and compared with those of the state-of-the-art approximate adders using HSPICE simulations in a 45-nm CMOS technology. The results indicate that employing the proposed RCPAs in the hybrid adders may provide, on average, 27%, 6%, and 31% improvements in delay, energy, and energy-delay-product while providing higher levels of accuracy. In addition, the structure is more resilient to delay variation compared to the conventional approximate adder. Finally, the efficacy of the proposed RCPAs is investigated in the discrete cosine transform (DCT) block of the JPEG compression and finite-impulse response (FIR) filter applications. The investigation reveals 60% and 39% energy saving in the DCT of JPEG and FIR filter, respectively, for the proposed RCPAs.

26 May 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MPMasoud Pashaeifar
Masoud Pashaeifar
LVLeo C. N. de Vreede
Leo C. N. de Vreede
MAMorteza S. Alavi
Morteza S. Alavi
This article presents a wideband series-Doherty power amplifier (SDPA) for millimeter-wave (mm-wave) fifth-generation (5G) applications. It features a compact two-step impedance inverting-based series-Doherty power combiner that provides broadband close-to-perfect power back-off (PBO) efficiency enhancement. The amplitude-to-amplitude (AM–AM)/amplitude-to-phase (AM–PM) performance of the load-modulated Doherty power amplifier for broadband operation is analyzed. We also devise a post-silicon inter-stage passive validation (PSIV) approach to evaluate the mm-wave chip prototype utilizing the embedded voltage root mean square detectors. The proposed SDPA is realized in a 40-nm bulk CMOS, and it delivers 20.4 dBm $P_{\text {SAT}}$ with 39.1%/34% PAE at 0-/6-dB PBO. Over a 23.5–30 GHz band, its PAE is >24% at 6-dB PBO. At 27 GHz, applying a “2 GHz 16-quadratic-amplitude modulation (QAM) orthogonal frequency-division multiplexing (OFDM)” signal, the proposed SDPA generates 10.2 dBm average power with 18.9% average PAE. The average error vector magnitude is better than −24.5 dB without digital predistortion for a “400-MHz 64-QAM OFDM” signal while generating an average output power of 8.8 dBm with 15% PAE. The AM–AM/AM–PM of the realized SDPA is investigated by employing a “50-MHz 64-QAM OFDM” signal, validating our analysis and showing that the linearity limitation of DPAs is systematic and predictable. Utilizing the proposed PSIV approach, the frequency response of the input/inter-stage passive circuits is measured, indicating an excellent agreement with 3-D electromagnetic (EM) simulation results.

27 July 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
MPMasoud Pashaeifar
Masoud Pashaeifar
MKMehdi Kamal
Mehdi Kamal
AAAli Afzali-Kusha
Ali Afzali-Kusha
MPMassoud Pedram
Massoud Pedram
In this paper, we present a framework for analytically estimating the output quality of common digital signal processing (DSP) blocks that utilize approximate adders. The framework is based on considering the error of approximate adders as an additive noise (approximation noise) that disturbs the output of the DSP block in question. A signal processing theoretical modeling approach for describing the power of the approximation noise which is the integral of error spectral density over the bandwidth, is developed. The output qualities of DSP blocks, such as finite impulse response filter, discrete cosine transform, and fast Fourier transform, which utilize approximate adders, are thus estimated. The accuracy of the proposed framework is evaluated by comparing mathematical model predictions to simulation results by using the signal-to-noise ratio (SNR) metric. The inaccuracy of the SNRs predicted by the framework was, on average, less than 2.5dB compared with that obtained from simulations. Therefore, a mathematical optimization approach based on Lagrange Multipliers for optimizing design parameters is also presented. The optimization is realized by choosing a proper configuration of the target block, such as determining the data width of the inexact computation part for each approximate adder in the design.

16 September 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MPMasoud Pashaeifar
Masoud Pashaeifar
LVLeo C. N. de Vreede
Leo C. N. de Vreede
MAMorteza S. Alavi
Morteza S. Alavi
This article presents a wideband energy-efficient transmitter (TX) for 5G mm-wave phased-array systems. It features an advanced double-quadrature direct upconverter (DQ-DUC) to improve its in-band linearity and spectral purity. The proposed TX architecture incorporates an efficiency-enhanced balanced power amplifier (EEBPA) that mitigates VSWR fluctuations in phased-array systems while enhancing efficiency at power back-off (PBO). The EEBPA comprises two identical series-Doherty power amplifiers (PAs) combined through a quadrature hybrid coupler forming a balanced PA. The proposed DQ-DUC consists of a pair of I/Q modulators and the proposed EEBPA’s quadrature combiner to further suppress the I/Q image. To verify the proposed techniques, a 40-nm CMOS prototype is implemented. It delivers 20 dBm $P~_{\text {1 dB}}$ with 40%/31% drain efficiency at $P~_{\text {1 dB}}$ /6-dB PBO. The measured TX output reflection coefficient is better than −18 dB over a 22.5–30-GHz band. Its intrinsic LO feedthrough and image-rejection ratio for a 100-MHz tone spacing over a 24–30-GHz band are better than −45 dBc/50 dB, respectively, without calibration. The average error vector magnitude (EVM) is better than −27.1 dB without digital pre-distortion for an eight-carrier “100-MHz 64-QAM OFDM” signal with an 800-MHz aggregated bandwidth while generating an average output power of 8.4 dBm with 10.8% drain efficiency. Its maximum forward-power/EVM deviations are better than 0.3/1.65 dB, respectively, for a “100-MHz 64-QAM” signal under a voltage standing wave ratio of 3.

27 February 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AKAnil Kumar Kumaran
Anil Kumar Kumaran
MPMasoud Pashaeifar
Masoud Pashaeifar
MAMats Alexanderson
Mats Alexanderson
LVLeonardus Cornelis Nicolaas de Vreede
Leonardus Cornelis Nicolaas de Vreede
MAMorteza S. Alavi
Morteza S. Alavi
This article introduces a single-supply balun-first three-way parallel Doherty power amplifier (PA) tailored for millimeter-wave (mm-wave) fifth-generation (5G) applications. It incorporates a bandwidth enhancement technique that widens the operational frequency range, enhances broadband power back-off (PBO) efficiency, and reduces impedance mismatch between differential PAs. Realized in 40-nm CMOS bulk technology with a core area of 0.77 $\text{mm}^\text{2}$ , the prototype delivers a saturated power/peak gain surpassing 20 dBm/16 dB, and it demonstrates a drain efficiency (DE) exceeding 15%/22%/33% at 9.5 dB/6 dB/0 dB PBO across a 24–30 GHz band. The proposed mm-wave PA achieves EVM/ACLR values of $-$ 24.3 dB/ $-$ 30.1 dBc for a 1-GHz 64-QAM OFDM signal, operating at an average output power (Pout) of 9.4 dBm with an average DE of 15%. For a 50-MHz 1024-QAM OFDM signal, it achieves an average Pout/DE of 8.6 dBm/12% with EVM/ACLR of $-$ 30 dB/ $-$ 36.3 dBc.

13 September 2024 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MPMasoud Pashaeifar
Masoud Pashaeifar
AKAnil Kumar Kumaran
Anil Kumar Kumaran
LVLeo C. N. de Vreede
Leo C. N. de Vreede
MAMorteza S. Alavi
Morteza S. Alavi
This article introduces an $N$ -way chain-weaver balanced power amplifier (PA) for millimeter-wave (mm-wave) phased-array transmitters (TXs). Taking advantage of the proposed combining network, an embedded impedance/power sensor is implemented, which can be utilized for output power regulation, built-in self-test, and load-based performance optimization. The proposed PA architecture offers linearity and gain robustness under the antenna’s frequency/time-dependent voltage standing wave ratio (VSWR). In the event of impedance mismatch, the proposed PA provides $N$ different loads equally distributed on the VSWR circle. Consequently, the performance of the PAs is the average of $N$ PAs with $N$ different loads, which makes this structure VSWR resilient. As a proof of concept, an eight-way chain-weaver balanced PA (BPA) is realized in 40-nm bulk CMOS technology, and it delivers 25.19-dBm P SAT with 16.19% PAE. The proposed PA supports a 2-GHz 64-QAM OFDM signal with 16-dBm average power, achieving $-$ 25-dB error vector magnitude (EVM). The average EVM is better than $-$ 30.3 dB without digital pre-distortion (DPD) for an “800-MHz 256-QAM OFDM” signal while generating an average output power of 12.17 dBm. The performance of the PA is also evaluated under 1.5:1–3:1 VSWR conditions. The measured small-signal gain variation under VSWR 3:1 is $\pm$ 0.7 dB. Moreover, assuming any frequency/time-dependent loading condition within the VSWR 3:1 circle, the proposed chain-weaver BPA achieves $<$ 2.8 $^{\circ}$ amplitude-to-phase (AM–PM) over 3-GHz bandwidth. Besides, the embedded impedance/power sensor accuracy outperforms the state of the art. The proposed impedance sensor can measure VSWR 3:1 by the maximum angle and magnitude errors of 12.3 $^{\circ}$ and 0.106, respectively.