12 October 2020 in Journal of Lightwave Technology
As datacenters continue to scale in size, energy efficiency for short reach (<2 km) links is a major factor for networks that may connect hundreds of thousands of servers. We demonstrate that links based on analog coherent detection (ACD) offer a promising path to simultaneously achieving significantly larger link budgets and improved link energy efficiency. A complete analysis is presented that considers the power consumption of all the photonic and electronic components necessary to realize an ACD link architecture based on 50 Gbaud (GBd) quadrature phase-shift keying (QPSK) signaling combined with polarization multiplexing to achieve 200 Gb/s/λ. These links utilize receivers that incorporate an optical phase-locked loop (OPLL) to frequency- and phase-lock the local oscillator (LO) laser to the incoming signal. QPSK modulation offers compelling advantages both in achievable link budget and in energy efficiency. Indeed, low-complexity electronics based on limiting amplifiers can be used as opposed to the linear front-ends, A/D converters, and digital signal processing (DSP) required for higher-order QAM or PAM formats. Our analysis indicates that links with 13 dB of unallocated budget operating at error rates of <10 −12 can be achieved and is compatible with higher error rates that require forward error correction (FEC). We present a comparison of silicon and InP platforms and evaluate both traveling-wave and segmented modulator designs, providing an illustration of the wide design space before converging on the most promising architectures that maximize energy efficiency and minimize laser power. We establish the theoretical potential to achieve picojoule-per-bit energy efficiency targets.
19 January 2023 in IEEE Journal of Selected Topics in Quantum Electronics
Enabling cost-effective and power-efficient laser source on a silicon photonics (SiPh) platform is a major goal that has been highly sought after. In the past two decades, tremendous effort has been made to develop various on-chip integration techniques to enhance SiPh circuits with efficient light-emitting materials. Here we review our recent advancements in hybrid flip-chip integration of III-V lasers on a 300-mm monolithic SiPh platform. By leveraging advanced complementary metal oxide semiconductor (CMOS) manufacturing processes, we have demonstrated wafer-scale laser attach based on a precisely controlled cavity formed on a silicon-on-insulator (SOI) substrate. The laser integration process is aided by precise mechanical alignment features on the SiPh wafer and high-precision fiducials on the laser. Efficient laser-to-SiPh-circuit butt-coupling with optical power up to 20mW was demonstrated through wafer- and module-level characterizations. Key performance metrics including side-mode suppression ratio, mode-hopping, and relative intensity noise were characterized after laser integration. In addition, early reliability assessments were performed on laser-attached SOI wafers and Si submount assemblies to understand the long-term performance stability of the lasers on the monolithic platform. To further enhance the performance of the laser-integrated chip, we explored alternative spot-size converters that could simultaneously enable improved coupling efficiency and relaxed fabrication tolerance, thus showing great promise over traditional designs.
27 November 2017 in Optics Letters
We present an on-chip wavelength reference with a partial drop ring resonator and germanium photodetector. This approach can be used in ring-resonator-based wavelength-selective switches where absolute wavelength alignment is required. We use the temperature dependence of heater resistance as a temperature sensor. Additionally, we discuss locking speed, statistical variation of heater resistances, and tuning speed of the switches.
4 October 2019 in Journal of Lightwave Technology
We present a strictly nonblocking 4×4 electrooptic silicon photonic switch fabric with on-chip gain. The switch integrates 12 Mach-Zehnder cells in a 3-stage topology equipped with fast electrooptic phase shifters, and thermooptic phase trimmers. To compensate for the losses of the fabric, a 4-channel GaInAsP/InP semiconductor optical amplifier array is flip-chip attached into an etched cavity in the silicon photonic chip with butt-coupled waveguide interfaces. The chip is wirebonded to a CMOS driver that provides push-pull drive to each elementary Mach-Zehnder cell. We demonstrate an optical switch assembly with net neutral insertion loss in the C-band together with nanosecond-scale reconfiguration time.
13 September 2017 in Optics Express
In this paper, we demonstrate that forward bias (+0.9V) of a high-speed silicon (Si) optical Mach-Zehnder modulator (MZM) increases the radio-frequency (RF) link gain by 30 dB when compared to reverse bias operation (−8V). RF applications require tunable, narrowband electro-optic conversion with high gain to mitigate noise of the optical receiver and realize high RF spur-free dynamic range. Compared to reverse bias, the forward bias gain rolls off more rapidly but offers higher RF link gain improvement of more than 13.2 dB at 20 GHz. Furthermore, forward bias is shown to result in comparable spurious-free dynamic range (SFDR: 104.5 dB.Hz2/3). We demonstrate through an analytical dc transfer curve the existence of simultaneous high gain and OIP3 and verify the theoretical results with measurement under forward bias at a bias point of around +0.9 V.
27 July 2020 in Journal of Lightwave Technology
Wavelength-selective switches have been proposed for datacenter use to enhance the scalability of their networks to help in meeting ever-increasing traffic demands. We have previously demonstrated a 4x4 ring-based crossbar silicon photonic switch in which each cross-point contained three ring pairs to partition the free spectral range (FSR) into three equal regions to reduce wavelength tuning range per ring pair thereby reducing both the tuning power consumption and stress on the ringswhile maintaining full routing flexibility. However, the question of scalability remains for such a crossbar switch in which 96 signal padsone routed to each ringare required to fully control it. In this paper we present a 4-port silicon photonic ring-assisted Mach-Zehnder interferometer (RAMZI) switch with multiple-sized rings per switching elements in a Bene network configuration to reduce the number of electrical pads required to 36 signal pads for the equivalent number of wavelength-selective switch elements per switch cell. The switch is 500 m x 3 mm in size and is packaged on a custom PCB. Another advantage the RAMZI switch has over the crossbar switch is that the loss through the switch is not path-dependent due to its balanced path configuration. In the crossbar switch, the difference between the shortest and longest paths is 2(N-1) switching elements. Finally, we present results from the fabricated switch and the outlook for further scaling of the switch architecture.