6 March 2023 in Journal of Lightwave Technology
Terahertz band (0.1 to 10 THz) with high carrier frequency and large available bandwidth has become a promising candidate to meet the 100 Gbit/s or even 1 Tbit/s data rate required by the future six-generation (6G) mobile communication networks. Compared with the all-electrical methods to generate terahertz signals, the photon-assisted technology can break the bottleneck of the bandwidth limit of the electronics devices, and generate the terahertz signal with high frequency, large bandwidth, flexible tunability and easy integration with the large capacity fiber link. In this paper, we introduce the typical methods to generate terahertz signals based on the photon-assisted technology, and review the representative achievements in different areas of terahertz communication, such as the large capacity terahertz transmission, the long distance terahertz transmission, the real-time terahertz communication, and the integrated terahertz sensing and communication. Based on the photon-assisted technology and various key techniques, devices and advanced digital signal processing (DSP) algorithms, we have obtained many great achievements in broadband terahertz communication and sensing, and the experimental setups and results have also been demonstrated in detail.
3 November 2023 in Journal of Lightwave Technology
From the perspective of wireless transmission distance in the terahertz-band (THz-band), the 10-100 m, 100-1000 m, and ≥1000 m ranges are recommended for indoor communications, medium-distance communications, and long-distance communications, respectively. However, most existing photonic terahertz communication demonstrations reported in previous studies have a distance of less than 100 m, with some being even shorter at 10 m or 1 m. In this study, by combining high-gain and high-sensitivity terahertz modules, as well as signal processing technology, we have successfully demonstrated transmission over 850 m with a net rate of 50 Gbit/s at a 320 GHz carrier frequency through outdoor field experimental verification. This particular demonstration represents the most significant distance-rate product, as well as the longest wireless distance achieved so far for photonic terahertz wireless communication. The results demonstrate that the integration of terahertz photonics, electronics, and cutting-edge DSP algorithms, has the potential to enable long-distance and high-speed wireless communication for frequencies ≥300 GHz. Our work represents another significant stride towards achieving our goal of realizing the world's first photonic terahertz-wave communication over kilometer-level distances.
8 September 2022 in Journal of Lightwave Technology
We propose and experimentally demonstrate a real-time fiber-THz-fiber 2 × 2 multiple-input multiple-output (MIMO) seamless integration system at 340–510 GHz using commercial digital coherent optics (DCO) modules for baseband signals processing, which realizes a record net rate of 103.125 Gb/s dual polarization quadrature-phase-shift-keying (DP-QPSK) signals delivery over two spans of 20 km wireline single-mode fiber-link and 3 m wireless 2 × 2 MIMO link without using THz power amplifier under 15% soft-decision forward-error-correction threshold (SD-FEC) of 1.56 × 10 −2 . Two kinds of THz-to-optical conversion schemes based on an integrated dual-polarization Mach-Zehnder modulator (DP-MZM) and two discrete intensity-modulators (IMs) are extensively investigated and compared. To the best of our knowledge, this is the first real-time demonstration of THz-wireless and 100 GbE fiber-optic networks seamless integration transmission, which is compatible with IEEE 802.3 and ITU-T G.798 specifications. It is a promising scheme to meet the demands of future fiber-wireless-integrations communication for low power consumption, low cost and miniaturization.
7 July 2025 in Nature Communications
High frequency microwave, spanning up to terahertz frequency, is pivotal for next-generation communication, sensing and radar. However, it faces fundamental noise limitations when frequency is pushed towards such boundary of conventional electronic technologies. Photonic microwave generation, particularly Kerr-comb-based microwave source, benefits from high frequency operation but still suffers from phase noise constraints. Here we overcome this drawback by developing a compact, electrically-driven Kerr comb system that achieves near quantum-limited phase noise for microwave synthesis up to 384 GHz. Leveraging high-Q fiber Fabry-Perot resonators and optimized noise modeling under limited pump power, we demonstrate ultra-low phase noise performances of −133 dBc/Hz (10.1 GHz) and −95 dBc/Hz (300 GHz) at 10 kHz offset, approaching quantum noise limits. This breakthrough enables 64QAM modulation in terahertz wireless communication and record 240 Gbps data rate without need for carrier phase estimation. Our device can serve as a key building block for the future information technology.
26 May 2023 in Journal of Lightwave Technology
The coexistence needs of sensing and communication in millimeter-wave (mmW) bands have urgently driven the seamless integration of sensing and communication in the upcoming mmW era. However, the time-frequency competition between the two functions makes it difficult to accommodate both high sensing resolution and large communication capacity. In this paper, we have designed a W-band fiber-wireless link with the integrated sensing and communication functions enabled by electromagnetic polarization multiplexing. The ultra-wideband fiber-wireless link in W band is enabled by the asymmetrical single-sideband modulation along with the optical heterodyne up-conversion. The electromagnetic polarization multiplexing allocates the sensing and communication functions on two orthogonal electromagnetic polarizations, respectively. Thus, all time-frequency resources of the fiber-wireless link can simultaneously serve these two functions without any resource competition, contributing to an ultra-high spatial resolution and an ultra-large data capacity at the same time. Our experimental results show the spatial resolution of up to 15 mm and data rate as high as 92 Gbit/s were simultaneously realized in W band after delivering over a 10.8-m wireless distance. The overall improvement of both the sensing and communication performance, to the best of our knowledge, led to a record capacity-resolution quotient of 61.333 Gbit/s/cm. In addition, we have qualitatively investigated the integrated sensing and communication fiber-wireless link, in terms of the carrier frequency, system bandwidth, multi-mmW access, and electromagnetic polarization crosstalk.
10 June 2022 in Journal of Lightwave Technology
The intelligentization of future society puts forward an urgent demand for high-precision sensing and ultra-high-speed wireless communications in the upcoming beyond fifth-generation (B5G) era. We propose and experimentally demonstrate a novel spectrum-efficient MMW-over-fiber (MoF) architecture for joint sensing and communication in B5G optical-wireless converged networks. The proposed MoF architecture is based on polarization interleaving and polarization-insensitive filtering. In the proposed architecture, the sensing and communication sidebands are generated simultaneously through asymmetrical single-sideband (ASSB) modulation, whereas the two local oscillator (LO) sidebands up-converting the sensing and communication signals to MMW band are obtained by carrier-suppressed double-sideband (CS-DSB) modulation. By interleaving the two sets of sidebands for sensing and communication in two orthogonal polarizations, the demand for higher bandwidth devices and the occupied spectral grid can thus be effectively reduced. The ASSB modulation eliminates the chromatic-dispersion- (CD) induced power fading for long-reach services. The polarization-insensitive filtering removes the need for complicated polarization tracking, resulting in a simple structure at the remote units (RUs) and polarization-free digital signal processing (DSP) at the user ends (UEs). Moreover, the two sets of sidebands originate from a shared laser, so frequency offset estimation (FOE) can be avoided to further reduce the complexity and power consumption of the DSP, thereby facilitating a user-friendly terminal. The experimental results show that a ±15-mm ranging accuracy at B5G MMW band for single-target detection is achieved, and a 30-cm ranging resolution for dual-target detection is also realized. Furthermore, a 23-Gbit/s error-free transmission rate at 28GHz over 5.41-km single-mode fiber (SMF) and 2-m wireless distance is successfully demonstrated without frequency offset compensation.