School of Chemistry and Chemical Engineering, Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources, Collaborative Innovation Center of Ecological Civilization, Hainan University, No 58, Renmin Avenue, Haikou 570228, China
Auto-generated profile, based on publicly available information
Niaz Ahmad
School of Chemistry and Chemical Engineering, Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources, Collaborative Innovation Center of Ecological Civilization, Hainan University, No 58, Renmin Avenue, Haikou 570228, China
Graphitic anode materials are commonly used in commercial lithium-ion batteries (LIBs), where the energy density potential has been fully exploited to about ∼360 mA h g−1 (372 mA h g−1 for LiC6), and it is hard to make further significant improvement. Owing to their highest theoretical specific capacity (4200 mA h g−1 for Li4.4Si), abundant earth reserves and environment-friendly silicon anode materials have great potential to be installed in next-generation high-energy-density LIBs. However, the industrialization of silicon-based anodes is hampered by the considerable volume change (∼300–400%) upon the lithiation/de-lithiation process, which inevitably causes particles’ pulverization, electrode cracking/swelling, and parasitic side reactions and leads to electric contact loss and eventual electrode destruction. Therefore, binders in silicon-based electrode systems adhere to active material particles and conducting additives, and tie up the matrix laminate and the current collector, which play a focal role in cell performances. Accordingly, the essential requirement of binders for Si-based anodes is briefly introduced; the binder's mechanical properties in terms of the tensile properties, adhesion strength of binders with Si particles and the peel strength of the electrode are emphasized. Moreover, the electronic conductivity and ionic conductivity of binders are proposed to improve the electrochemical performance of Si-based electrodes. Likewise, the mechanical degradation of the Si electrodes and their robust binder strategies will also be discussed. Finally, viable strategies are discussed to address the challenge of binders as the future development direction and application prospects.
Next-generation energy storage systems rely heavily on the capability of fast charging as they allow electronic devices to be charged within a remarkably brief period. The practical applications of fast-charging technology are severely hindered by unsatisfactory electrochemical performance, e.g., low specific capacity, low areal capacity, low coulombic efficiency, and very limited life span, resulting in a fast-discharging process. This comprehensive review provides a concise overview of the obstacles faced and thereby the recent advancements made in the realm of fast-charging all-solid-state lithium batteries. Firstly, it explains the inherent challenges of solid-state electrolytes (SSEs) and conventional ASSLB design that impede fast-charging capabilities. Based on these challenges, the specifications and strategies for optimizing the SSEs, electrodes, and electrode/SSE interfaces are discussed to achieve the fast-charging phenomenon in ASSLBs. To give readers a better understanding of ASSLBs under fast-charging capabilities, a comprehensive conclusion and novel points of view are included in the prospects.
18 April 2024 in ACS Applied Materials & Interfaces