1 October 2020 in IEEE Transactions on Control Systems Technology
In this article, a novel robust observer-based nonlinear control approach is proposed for quadrotors with unmodeled dynamics and external disturbances, wherein the tracking errors are restricted effectively. Two nonlinear disturbance observers are proposed to deal with uncertainties in the inner and outer loops, respectively. On this basis, a robust observer-based nonlinear control approach is put forward for quadrotor systems. Specifically, in the outer loop subsystem, a robust observer-based control scheme is proposed, which can reduce unexpected tracking errors for quadrotors effectively. Subsequently, based upon the geometric methods, the coordinate-free attitude controller and the nonlinear disturbance observer are integrated as a robust controller in the inner loop subsystem. Based upon full nonlinear dynamics, the solutions of the closed-loop system are proven to be uniformly ultimately bounded by means of rigorous Lyapunov analysis. A series of comparative experiments consisting of the implementation of a nonlinear proportional-integral-derivative (PID)-type controller, an observer-based sliding mode controller, and the proposed controller are conducted to demonstrate the remarkable performance of the proposed method in terms of higher tracking accuracy and stronger robustness.
22 May 2019 in IEEE Transactions on Industrial Electronics
This paper proposes a novel nonlinear geometric hierarchical dynamic visual servoing approach to drive a quadrotor to the desired pose defined by a previously captured image of a planar target. Different from existing works, the key novelty is to extend the position-based nonlinear hierarchical control to image-based nonlinear hierarchical control. More specifically, by seamlessly integrating the nonlinear hierarchical control with the geometric control, and taking full advantage of the cascade property of the system, the proposed visual servoing strategy does not require the thrust force or its derivative to be measurable when compared with the existing backstepping methods, which brings much convenience for practical applications. For the attitude loop, the axis-angle rotation representation is adopted to design a tracking control law on the vectorspace ${\mathfrak{so}{(3)}}$ . In the outer loop, perspective image moments in the virtual image plane are employed as image feedback to construct the outer-loop image-based visual servoing controller with geometric control and backstepping techniques. Based on Lyapunov techniques and the theory of cascade systems, it is rigorously proven that the proposed image-based controller achieves asymptotic stability. Comparative experiments are conducted to show that the proposed approach has advantages of better transient performance, better steady-state performance and stronger robustness.
29 December 2021 in IEEE Transactions on Industrial Electronics
In this article, a novel informative autonomous exploration strategy with uniform sampling is proposed to efficiently reduce the unknown volume of 3-D environments and provide an accurate truncated-signed-distance-function-based reconstruction for quadrotors. Different from existing methods, the proposed method locally samples candidate viewpoints uniformly and achieves a global coverage efficiently by backtracking history nodes when there is no unmapped space near the quadrotor. Specifically, by sampling viewpoints with a fixed radius and assigning priority, the best one is selected to which a collision-free path will be planned. Then, a history list is designed to store the executed nodes, which is backtracked to find the unmapped space, resulting in a complete exploration of the environment. In addition, a hierarchical information gain is proposed to balance the space exploration efficiency and reconstruction accuracy by considering the uncertainty of the surface and volume of the unknown space. Comparative experiments in simulation show that the proposed method outperforms the sampling-based state-of-the-art method in terms of both the exploration time and reconstruction accuracy. Moreover, the effectiveness of the proposed approach is further evaluated in a real-world experiment.
17 February 2020 in IEEE Transactions on Industrial Informatics
16 November 2020 in IEEE Transactions on Industrial Electronics
In this paper, we propose a novel optimization-based tightly coupled Direct Visual-Inertial Odometry (DVIO), which fuses the visual and inertial measurements to provide real-time full state estimation. Different from existing frameworks, the key novelty of the proposed method is to integrate the data association, state estimation, and outlier detection into a nonlinear optimization framework in a tightly coupled way. Specifically, by jointly minimizing the preintegration error of the inertial measurement unit and the photometric error of the camera, the data association is tightly coupled with the process of state estimation. Then, an iterative selection strategy is designed to reject outliers during the data association and establish more visual constraints in the optimization. In addition, a hybrid weighting method is proposed to tightly integrate the iterative selection into the optimization by dynamically weighting residual terms. As a consequence, the proposed method aligns the image patches, estimates the motion, and removes the outliers synchronously. Comparative experiments on the public dataset and extensive real-world experiments show that DVIO outperforms state-of-the-art visual-inertial odometries in terms of both the accuracy and the robustness. Thus, DVIO is highly applicable to the navigation or the simultaneous localization and mapping (SLAM) of mobile devices or agile robots like micro air vehicles (MAVs).
11 May 2020 in IEEE/ASME Transactions on Mechatronics
A novel real-time time-optimal trajectory planning (TOTP) approach is proposed for rotorcrafts under velocity constraints and complex non-convex thrust, attitude input constraints. Different from existing works, the proposed method is the first real-time TOTP solution for rotorcrafts subject to velocity constraints and these non-convex input constraints. The key insight is to transform the thrust and attitude constraints into the inequality constraints on the quadratic nonlinear function of the path acceleration and the squared velocity, by exploiting the differential flatness characteristic of the rotorcraft. As a result, the constraints can be formulated as the problem of jointly solving analytical quadratic inequalities. On this basis, a path acceleration calculation algorithm is proposed to obtain the backward and forward acceleration profiles. In addition, by formulating the well-known field of view (FOV) constraints into the attitude constraints, the proposed framework can further guarantee the FOV constraint for visual servoing of rotorcrafts. Comparative experimental results are presented to show the superior performance of the proposed approach when compared with the second-order cone programming (SOCP) approach. In addition, some visual servoing experiments are conducted to demonstrate the capability of the proposed method to guarantee the FOV constraint.