Despite numerous studies on fires, each simulation faces several limitations. Fire is a complex phenomenon, and some of its processes remain poorly understood. Furthermore, the progression of flames and smoke is influenced by turbulent flow phenomena. In this context, this article delves into the analysis of smoke flow behavior using numerical fluid dynamics simulations (CFD) with the assistance of ANSYS FLUENT. The primary focus lies in describing the longitudinal ventilation system, a critical element for fire management. The chosen study area is the Soumbédjioune tunnel located in Dakar, Senegal, characterized by a sinusoidal floor with an amplitude equivalent to one-third of the entrance height. The tunnel has dimensions of 300 m in length (L), 10.5 m in width (W), and 7.22 m in height (H). To simulate the source of heat and smoke, a 2-cubic meter fire was placed in the center of the tunnel, modeling the combustion of N2, H2O, and O2 gases at a high temperature of 926.85 °C. The simulations yielded a critical ventilation velocity of 5.8 m/s, a crucial piece of information for fire management in this specific context. Furthermore, this article extends its analysis by examining the evolution of temperature and velocity contours in both ventilated and non-ventilated conditions, providing a deeper understanding of the underlying mechanisms at play.
Solar thermal energy is available in abundance in a country like Senegal where direct solar radiation is on average 1950kWh/m2 per year. Solar drying is the most popular method to preserve food in our country. However, it is limited by the intermittent nature of the sun. The objective of this paper is to overcome the intermittency of the sun by integrating a thermal bed into the solar dryer. The thermal bed is made of basalt and biochar for heat storage and humidity absorption respectively. An experimental study was done using papaya and moringa leaves. The results obtained show that the thermal bed stores heat at the temperature of 39°C at 10p.m. Papaya is dried in two days and moringa leaves are dried in one day. For papaya slices, water content is 15% and was reached at the second day of drying. Also, moringa dry leaves water content is 8%. This value begins to be reached from 3 p.m. in the afternoon. Thus, the thermal bed temperature, the air temperature between the drying racks and the drying chamber outlet air temperature are respectively an average of 48.67°C, 48°C and 47.22°C compared to 34.33°C of the ambient temperature, a difference of more than 4°C. The experimental study is supported by a Computational fluid dynamic (CFD) analysis.
In this work, we studied the mixed convection of the airflow in a tunnel open at both ends. The tunnel has a sinusoidal trace and the horizontal ceiling is provided with an opening in the center. The tunnel floor is uniformly heated. Although of interest for many industrial applications, the configuration of this study has been studied very little from an academic point of view. Coupled equations of Naiver-Stokes and energy are solved numerically by the finite volume method with the Boussinesq hypothesis. We analyzed the effect of the parameters that characterize heat transfer, and the flow structure. Several situations have been considered by varying the Richardson number (1.3610-3≤Ri≤2.17.104) for a Prandtl number Pr = 0.71.
Solar thermal energy is available in abundance in a country like Senegal where direct solar radiation is on average 1950 kWh/m2 per year. Solar drying is the most popular method to preserve food in our country. However, it is limited by the intermittent nature of the sun. The objective of this paper is to overcome the intermittency of the sun by integrating a thermal bed into the solar dryer. The thermal bed is made of basalt and biochar for heat storage and humidity absorption respectively. An experimental study was done using papaya and moringa leaves. The results obtained show that the thermal bed stores heat at the temperature of 39 °C at 10 p.m. Papaya is dried in two days and moringa leaves are dried in one day. For papaya slices, water content is 15% and was reached at the second day of drying. Also, moringa dry leaves water content is 8%. This value begins to be reached from 3 p.m. in the afternoon. Thus, the thermal bed temperature, the air temperature between the drying racks and the drying chamber outlet air temperature are respectively an average of 48.67°C, 48°C and 47.22° C compared to 34.33°C of the ambient temperature, a difference of more than 4°C. The experimental study is supported by a Computational fluid dynamic (CFD) analysis.
Crude oil rheology critically controls dispersion mechanisms during coastal oil spills and must be explicitly incorporated into predictive numerical models. In this study, a three-phase CFD–VOF framework is coupled with a non-Newtonian Herschel–Bulkley formulation to investigate the dispersion of light crude oil under nearshore wave conditions. The hydrodynamic configuration reproduces realistic shallow-water waves, while oil behavior is resolved through shear-dependent viscosity.For Hibernia crude oil, simulations show a rapid decrease in apparent viscosity from approximately 4.0 kg·m⁻¹·s⁻¹ at release to about 0.3 kg·m⁻¹·s⁻¹ within 20 s, followed by stabilization between 0.18 and 0.22 kg·m⁻¹·s⁻¹ beyond 40 s. This shear-thinning response enhances oil mobility, leading to pronounced surface spreading and thinning. The oil volume fraction at the free surface decreases from about 0.26 at 5 s to below 0.08 at 20 s and drops under 0.004 after 120 s, while vertical profiles indicate progressive immersion with volume fractions reaching approximately 0.04 at depth around 40 s. These results demonstrate that dispersion is governed by the coupling between hydrodynamic shear and rheological response, emphasizing the necessity of non-Newtonian modeling for reliable oil spill prediction and response planning.