In this paper, renewable photovoltaic (PV) and wind turbine (WT) generators with battery are coupled via a flying capacitor inverter to a power grid in parallel with an alternating load. This paper studies a new control structure focused a backstepping control of the energy storage system. The proposed methods to adjust the active and reactive power by adjusting the currents, the DC bus voltage on the grid side converter, as well as the battery voltage allow three selective control targets to be achieved, the objective is to obtain purely sinusoidal signals and symmetrical gate current, suppresses reactive power ripples and cancels active power ripples in the event of grid imbalance. In order to optimize the power flow in the different parts of the production process, an energy management algorithm is developed in order to mitigate the fluctuations of the load, the considered multi-sources on-grid system was implemented in the Matlab/Simulink, the results show the effectiveness of the proposed method. To analyze our approach, a prototype is modeled, simulated and can be realized in an experimental test setup.
18 October 2024 in Electrical Engineering & Electromechanics
Introduction. This paper presents the novel design and analysis of a hybrid renewable energy system that combines a wave energy converter (WEC) with a floating photovoltaic (FPV) system for offshore installation, with a specific focus on Oran as a case study. The purpose of integrating these two technologies is to harness both wave and solar energy, thereby maximizing energy output and enhancing the reliability of renewable energy sources in offshore environments. The goal of this study is to develop a hybrid system that leverages the complementary nature of WEC and FPV technologies to maximize energy output and improve reliability. By integrating these technologies, the system aims to overcome the limitations of standalone energy systems. The methodology includes selecting suitable WEC and FPV technologies, optimizing their configurations, and analyzing their combined performance under various environmental conditions. To assess the energy production potential, structural stability, and economic feasibility of the hybrid system, computational simulations and data analysis are employed. This comprehensive approach ensures rigorous testing and optimization for real-world applications. The results demonstrate substantial improvements in energy yield and system resilience compared to standalone WEC or FPV systems. The hybrid system shows enhanced performance, particularly in consistent energy output and structural robustness. These findings indicate that combining WEC and FPV technologies can lead to more reliable and efficient offshore renewable energy solutions. The practical values are significant, providing insights into efficient and sustainable offshore renewable energy solutions. By focusing on Oran, it offers a localized perspective that can be adapted to similar coastal areas globally, contributing to the advancement of renewable energy technologies. The hybrid system’s enhanced reliability and efficiency support the broader goal of sustainable energy development in marine environments, highlighting its potential for widespread application and impact. References 23, tables 4, figures 17.