Ni3S2 nanocrystals wrapped by thin carbon layer and anchored on the sheets of reduced graphene oxide (Ni3S2@C/RGO) have been synthesized by a spray-coagulation assisted hydrothermal method and combined with a calcination process. Cellulose, dissolved in Thiourea/NaOH aqueous solution is chosen as carbon sources and mixed with graphene oxide via a spray-coagulation method using graphene suspension as coagulation bath. The resulted cellulose/graphene suspension is utilized as solvent for dissolving of Ni(NO3)2 and then used as raw materials for hydrothermal preparation of the Ni3S2@C/RGO composites. The structure of the composites has been investigated and their electrochemical properties are evaluated as anode material for lithium-ion batteries. The Ni3S2@C/RGO sample exhibits increasing reversible capacities upon cycles and shows a superior rate performance as well. Such kinds of promising performance have been ascribed to the wrapping effect of carbon layer which confines the dislocation of the polycrystals formed upon cycles and the enhanced conductivity as the integration of RGO conductive substrate. Discharge capacities up to 850 and 630 mAh·g−1 at current densities of 200 and 5000 mA·g−1, respectively, are obtained. The evolution of electrochemical performance of the composites with structure variation of the encapsulated Ni3S2 nanocrystals has been revealed by ex-situ TEM and XRD measurements.
7 October 2022 in Journal of Electrochemical Energy Conversion and Storage
Porous metallic materials are widely used for lithium-ion battery (LIB) electrodes because of their low density, efficient ionic/electron pathways, and high specific surface area. In this study, we fabricate nanoporous Cu using chemical and electrochemical dealloying methods based on a Cu-Ga alloy. The effects of the dealloying conditions on the derived microstructure of the nanoporous metal and its evolution mechanisms are discussed. Analysis and control of the electrochemical dealloying process reveal that the sample morphology can be adjusted and the phase component can be controlled. Accordingly, a 3D CuGa2 electrode with a nanoporous structure is controllably synthesized, and it exhibits a higher specific capacity and cyclic stability than a 2D CuGa2 electrode when used as a LIB anode.