1 October 2018 in Physics of Fluids
A kinematic simulation with an approximate deconvolution (KSAD) hybrid model is proposed to predict the Lagrangian relative dispersion of fluid particles in a large eddy simulation (LES) of isotropic turbulent flows. In the model, a physical connection between the resolved and subgrid scales is established through the energy flux rate at the filter width scale. Due to the lack of subgrid-scale (SGS) turbulent structures and SGS model errors, the LES cannot accurately predict the two- and multi-point Lagrangian statistics of the fluid particles. To improve the predictive capability of the LES, we use an approximate deconvolution model to improve the resolved scales near the filter width and a kinematic simulation to recover the missing velocity fluctuations beneath the subgrid scales. To validate the proposed hybrid model, we compare the Lagrangian statistics of two- and four-particle dispersion with the corresponding results from the direct numerical simulation and the conventional LES. It is found that a significant improvement in the prediction of the Lagrangian statistics of fluid particles is achieved through the KSAD hybrid model. Furthermore, a parametric study regarding the wavenumbers and orientation wavevectors is conducted to reduce the computational cost. Good results can be obtained using a small number of wavenumber modes and orientation wavevectors. Thus, we can improve the prediction of the Lagrangian dispersion of fluid particles in the LES by applying the KSAD hybrid model at an acceptable computational cost.
1 September 2020 in Physics of Fluids
In large-eddy simulations of particle-laden isotropic turbulent flows, the collision of inertial particles is strongly influenced by missing small-scale turbulence. In this paper, we apply the Kinematic Simulation with Approximate Deconvolution (KSAD) model to determine the contribution of small-scale turbulence to the motion of inertial particles and improve the prediction accuracy of the radial distribution function (RDF) and radial relative velocity (RRV), which are closely related to particle collisions. Different values of Stokes numbers (St), which are defined as the ratio of the particle response time to the Kolmogorov time scale, are considered. The KSAD model significantly improves the prediction accuracy of the RRV for all considered St. For the prediction of RDF, good agreement between the KSAD model and direct numerical simulations is only observed for large St, i.e., St ≥ 2.0. To explore the reason for the poor prediction of the KSAD model for small St, we compare the Eulerian statistics of the flow fields and the Lagrangian properties of the particles from different simulations and find the key reason is that the Gaussian turbulence generated in the kinematic simulation model is inadequate in recovering the vortex centrifugal effect of small-scale turbulence on the inertial particle clustering at small St.
23 December 2024 in Journal of Fluid Mechanics
Developing large-eddy simulation (LES) wall models for separated flows is challenging. We propose to leverage the significance of separated flow data, for which existing theories are not applicable, and the existing knowledge of wall-bounded flows (such as the law of the wall) along with embedded learning to address this issue. The proposed so-called features-embedded-learning (FEL) wall model comprises two submodels: one for predicting the wall shear stress and another for calculating the eddy viscosity at the first off-wall grid nodes. We train the former using the wall-resolved LES (WRLES) data of the periodic hill flow and the law of the wall. For the latter, we propose a modified mixing length model, with the model coefficient trained using the ensemble Kalman method. The proposed FEL model is assessed using the separated flows with different flow configurations, grid resolutions and Reynolds numbers. Overall good a posteriori performance is observed for predicting the statistics of the recirculation bubble, wall stresses and turbulence characteristics. The statistics of the modelled subgrid-scale (SGS) stresses at the first off-wall grids are compared with those calculated using the WRLES data. The comparison shows that the amplitude and distribution of the SGS stresses and energy transfer obtained using the proposed model agree better with the reference data when compared with the conventional SGS model.
24 November 2022 in Ocean Engineering
1 October 2021 in Physics of Fluids
The wall-resolved large-eddy simulations of turbulent flows over periodic hills are carried out to study the Reynolds number effect on flow statistics. Five different Reynolds numbers ranging from 2800 to 37 000 are considered. The present simulations are validated by comparing the time-averaged flow statistics with those from the literature. The Reynolds number effect is first examined on the skin friction and pressure coefficients, the isosurfaces of and Q criteria, and the vertical profiles of flow statistics. The results show that (1) at most locations the magnitude of friction coefficient decreases with the increase in Reynolds number, while the pressure coefficient varies in the opposite direction; (2) smaller turbulence structures arise at higher Reynolds numbers; and (3) the mean velocities and Reynolds stresses in general exhibit asymptotic behaviors with the increase in Reynolds number. The statistical properties of turbulence structures are further examined via the probability density function and time correlation of velocity fluctuations. At last, the dynamics in the separation bubble is investigated by examining the flow statistics and the budget equation of mean kinetic energy (MKE) on the coordinate with its origin fixed at the recirculation center, and the power spectral density of the velocity fluctuations. Similarities are in general observed for the mean velocities, Reynolds stresses, and the MKE budget in the rear part of the separation bubble. The mean convection term and turbulence convection term are observed playing a key role on the decrease in bubble size with the increase in Reynolds number.
1 January 2022 in Theoretical and Applied Mechanics Letters