For accurate beam analysis of a radiating antenna array on a complex platform, the mutual coupling and platform scattering effects are important. We proposed a beam pattern analysis method for an antenna array on a complex platform, which combines the active element pattern method of the receiving mode and hybrid geometrical theory of diffraction antenna current Green's function technique. This proposed method clearly and mathematically divides the beam pattern of the antenna array on a complex platform into mutual coupling and platform scattering components. For a 12 linear dipole array embedded in a complex aircraft, analyses of the beam pattern and boresight error using the proposed method were verified with the method of moment results, which were simulated with FEKO. With reasonably good accuracy, the proposed method can efficiently analyze a beam pattern reflecting the mutual coupling effect and the platform scattering effect. Additionally, convex optimization with the proposed method is simply applied to synthesize the compensated beam pattern.
An electromagnetic (EM) absorber-embedded Ka-band double-layer tapered slot antenna (DLTSA) is proposed in this work. The EM absorber is placed on both sides of the tapered radiating slots as a means of achieving the reduced monostatic radar cross section (RCS) at the X-band. A conventional tapered slot antenna (TSA) with EM absorbers at the same position suffers from the distorted current distribution from the feedline to the radiating slots and causes a degraded radiation performance with a tilted beam. In contrast, the DLTSA with EM absorbers maintains the impedance and radiation characteristics of the antenna without the EM absorbers, while achieving the reduced monostatic RCS for the cross-polarized incident wave. The functionality of the reduced RCS is verified with the 4-by-4 DLTSA array design. The 4-by-4 array prototype with FGM-125 EM absorbers is matched at the Ka-band with a 14.7 dBi boresight gain at 35 GHz. The monostatic RCS is measured in an indoor environment, showing 6.5 dB monostatic RCS reduction at the X-band on average, verifying the computed expectations. This work validates the possible use of EM absorbers at the front side of a missile seeker composed of end-fire radiating elements.
31 October 2022 in The Journal of Korean Institute of Electromagnetic Engineering and Science