13 January 2023 in Engineering Failure Analysis
6 October 2021 in Fire and Materials
3 January 2025 in IEEE Transactions on Instrumentation and Measurement
The single non-destructive testing (NDT) techniques face the problem of low resolution when simultaneously detecting different types and locations of defects. Composite inspection methods, which combine different NDT techniques, have been widely studied due to their high defect detection accuracy. However, most of the existing composite detection methods require complex sensor systems or rely on complex signal processing algorithms. Therefore, this paper proposes a novel hybrid sensor based on electromagnetic acoustic transducer (EMAT) and magnetic flux leakage (MFL) mechanism, which allows to accurately detect defects in ferromagnetic materials. This hybrid sensor employs a straightforward EMAT-MFL configuration, which only requires a single permanent magnet to generate the requisite magnetic field for the EMAT and MFL sensor components. In addition, it adopts a unique orthogonal butterfly coil design for the detection of cracks. The obtained results show a significant frequency difference between the EMAT and MFL signals, which demonstrates their independence and lack of interference. This eliminates the potential issue of signal aliasing decoupling. The hybrid sensor can fully use the advantages of the EMAT and MFL technologies to simultaneously detect defects and cracks on the top and bottom surfaces of ferromagnetic materials. Furthermore, the wall thinning defects can be detected with a maximum detection error of only 4.48%. This paper proposes a feasible approach for miniaturizing hybrid sensors and increasing their detection performance.