10 November 2021 in Lithosphere
To study the dynamic damage and fracture of metamorphic limestone under explosive load and the stability of the surrounding rock, the stress-strain curve, fracture morphology, and energy dissipation characteristics of metamorphic limestone in the Dahongshan mining area under different strain rates were studied by the Hopkinson pressure bar (SHPB), stress wave analysis, and fractal theory. The experimental results show that the crushing form and degree are significantly affected by the loading strain rate. There are several typical failure modes. When the strain rate is 17.56 s−1, there is no obvious failure except corner cracks. When the strain rate is between 26.92 s−1 and 56.18 s−1, the failure mode of the specimen is axial splitting failure, and when the strain rate is 67.34 s−1, splitting and shearing failure occur. With the increase of the strain rate, the growth rate of the dynamic compressive strength slows down. Compared with static compressive strength, the strength factor increases from 1.15 to 4.19. Also, the fractal dimension shows a gentle increase. When is in the range of 1.82~2.24, there is a sudden change in fragmentation when the strain rate is in the range of 34.70 s−1~56.18 s−1. Energy dissipation density increases logarithmically with the strain rate. The results reveal the dynamic breaking and energy consumption laws of metamorphic limestone under impact loads with different strain rates and could provide some reference value for the safe and efficient construction in the Dahongshan mining area and similar engineering projects.
1 January 2021 in Shock and Vibration
In order to prevent rockfall caused by open‐pit blasting on the high and steep slope and ensure that the passive protective net structure has sufficient impact resistance, the mechanism of blasting flyrock causing rockfall is analyzed by using ANSYS/AUTODYN to establish the model of rockfall and passive protective net; at the same time, the influences of protective net size, rockfall kinetic energy, and rockfall size to the protective effect were also studied. The results show that under the condition of the same rockfall kinetic energy and rockfall size, the larger the size of the protective net, the longer the buffer time, and the impact force that net can sustain is greater; by assuming the protective net size and rockfall size to be a constant, the greater the rockfall kinetic energy, the less the interaction time between rock and net, and the greater the impulse force that net can suffer; similarly, by keeping the protective net size and the kinetic energy of rockfall to be a constant, it is found that the larger the size of the rockfall, the larger the interaction area and longer interaction time with the net, and the less net will be disrupted; the protective net used in the mine can intercept the rockfall caused by flyrock in blasting process effectively and ensure the safety of villager at the foot of the mountain.