1 March 2021 in Acta Materialia
3 November 2023 in Acta Materialia
RDRaja Shekar Bhupal Dandu
+6
1 April 2023 in International Journal of Geomechanics
Thermal operations threaten the safety of geological engineering, especially the rock–concrete interface, as the link of in situ stress transmission is crucial to structural stability. In this study, three-point bending experiments were conducted on sandstone–concrete binary specimens to investigate the thermal effect on fracture behaviors of the rock–concrete bonding interface. The deformation evolution characteristics were analyzed by digital image correlation (DIC). The results demonstrated that the temperature has a remarkable degradation for the bonding capacity of sandstone–concrete interfaces, which can be classified into the rapid-damage stage and steady-damage stage with a critical temperature of 300°C. The phased degradation is closely related to the decline in interfacial adhesion and the thermal damage to concrete, instead of sandstone. By determining the strain inflection point of different positions on the crack path, a new idea is proposed to reveal the crack propagation process. During the loading process, the crack propagates slowly to a certain length and then coalescences violently when subjected to a small load increment. In addition, the crack initiation load is weakened by the elevated temperature or lower interface roughness. Thermal hazards (e.g., tunnel fire, coal spontaneous combustion, and radioactive heat in nuclear waste repositories) would weaken the bearing capacity of surrounding rock-lining structures. To ensure the durability of geoengineering and evaluate remediation value, it is essential to determine the mechanical and deformation properties of rock–concrete binary specimens subjected to a high temperature. The study suggests the temperature has a remarkable degradation for the bonding capacity of sandstone–concrete interfaces, which can be classified into the rapid-damage stage and steady-damage stage with a critical temperature of 300°C. The phased degradation is closely related to the decline in interfacial adhesion and the thermal damage to concrete, instead of sandstone. Therefore, the thermal damage not exceeding 300°C would retain the bearing capacity of sandstone–concrete interfaces; otherwise, the concrete lining must be removed and poured again. Meanwhile, roughening the rock surface could improve the interfacial adhesion but the effect is limited.
26 October 2021 in ACS Applied Bio Materials
19 April 2024 in Science Advances
Preclinical studies have shown that immunostimulatory cytokines elicit antitumor immune responses but their clinical use is limited by severe immune-related adverse events upon systemic administration. Here, we report a facile and versatile strategy for noncovalently anchoring potent Fc-fused cytokine molecules to the surface of size-discrete particles decorated with Fc-binding peptide for local administration. Following intratumoral injection, particle-anchored Fc cytokines exhibit size-dependent intratumoral retention. The 1-micrometer particle prolongs intratumoral retention of Fc cytokine for over a week and has minimal systemic exposure, thereby eliciting antitumor immunity while eliminating systemic toxicity caused by circulating cytokines. In addition, the combination of these particle-anchored cytokines with immune checkpoint blockade antibodies safely promotes tumor regression in various syngeneic tumor models and genetically engineered murine tumor models and elicits systemic antitumor immunity against tumor rechallenge. Our formulation strategy renders a safe and tumor-agnostic approach that uncouples cytokines’ immunostimulatory properties from their systemic toxicities for potential clinical application.
1 April 2007 in Chinese Journal of Aeronautics
A niobium-modified layer on pure titanium surface was obtained by means of double glow plasma surface alloying technique. The modified layer was uniform, continuous, compact and well adhered to the substrate. The niobium composition in the modified layer decreased gradually from the surface to the substrate. The oxidation behavior of the niobium-modified layer was investigated and compared with the untreated surface at 900 °C for 100 h. Characterization of the layers was performed using X-ray diffraction and scanning electron microscope, respectively. The test results show that the oxidation behavior of pure titanium was improved by niobium alloying process. Niobium has a positive influence on the oxidation resistance.