1 September 2023 in Journal of Optical Technology
Subject of study. A fiber-optic temperature sensor, based on a Fabry–Perot interferometer obtained by welding optical fibers, is developed and characterized. Aim of study. The aim is to develop and characterize a temperature sensor based on a fiber-optic Fabry–Perot interferometer obtained by arc welding and evaluate its temperature-sensing performance. Method. The design of the temperature sensor is implemented based on a Fabry–Perot interferometer obtained by welding optical fibers. The reflecting mirrors of the sensor comprise layers of thin films of titanium dioxide. The interferometer interrogation method is based on the use of a vertically emitting laser operating in the pulsed generation mode. The principle of registering the phase shift between radiation reflected from the interferometer mirrors with changes in temperature is based on auxiliary modulation of the laser radiation wavelength due to a periodic change in the pulse duration. Main results. During the temperature evaluation of the developed sensor, the phase characteristics of the Fabry–Perot interferometer were obtained in the temperature range of +20∘C to +380∘C. A shift in the operating point was registered with changes in the ambient temperature. The results of the experiment indicated that an increase in the ambient temperature leads to an increase in phase difference between the radiation reflected from the first and second mirrors of the interferometer. Results suggest that the phase sensitivity to temperature change is 0.96, 1.68, and 2.35 rad/°C at distances between mirrors corresponding to 5, 8, and 11 mm, respectively. Practical significance. The proposed fabrication method for the Fabry–Perot interferometer provides sufficient opportunities for the formation of a resonator with different lengths and also makes it possible to exclude the use of additional materials in its design. Hence, the interferometer exhibits small weight and size parameters, and thus, it can be used in a wide range of applications, including as a sensitive element of a temperature sensor. The sensor interrogation method employed in the study eliminates the need for costly spectral measuring instruments such as optical spectrum analyzers and interrogators.
1 April 2024 in Journal of Optical Technology
Subject of study. In this study, a method for dynamic weighting of moving objects by optical power registration using fiber Bragg gratings is investigated. The aim of the study is to develop and validate a method for measuring the parameters of moving objects under laboratory conditions. Method. The developed method is based on registering the change in optical power reflected from a sensing element (SE) composed of two fiber Bragg gratings (FBGs) and a chirped fiber Bragg grating (CFBG). When a load is applied to the SE, the reflection spectrum of the FBG shifts to the sharply increasing region of the spectral response of the CFBG. The optical power reaching the interrogator corresponds to the intensity of the intersection of the two spectral responses of the diffraction structures. A two-channel power meter is used as the radiation receiver. From the received data, the parameters of the moving object can be determined. Main results. This study proposes a new method for measuring the weight and velocity of moving objects using FBGs and CFBGs. Experimental studies on dynamic and static weighting have been conducted. Based on the experimental data, the dependencies of the signal amplitude on time for different weights, as well as the calculation of the object’s velocity, are constructed and shown. Practical significance. The scientific and technical solution proposed in this study is of interest for the further development and operation of automatic weight control systems. The proposed method can optimize the process of controlling the weight and speed of moving objects, thereby ensuring road safety.