29 August 2023 in Journal of Nuclear Materials
27 September 2023 in Journal of Nuclear Materials
23 February 2024 in ACS Omega
Voloxidation is a potential alternative reprocessing scheme for spent nuclear fuel that uses gas–solid reactions to minimize aqueous wastes and to separate volatile fission products from the desired actinide phase. The process uses NO2(g) as an oxidant for uranium dioxide (UO2) fuel, ideally producing soluble uranium powders which can then be processed for full recycle. To continue development of the process flowsheet for voloxidation, ongoing examination of the process chemistry and associated process materials is required: discrepancies in the proposed chemical reactions that occur when spent nuclear fuel is exposed to NO2(g) atmospheres must be addressed. The objective of this work is to analyze the intermediate solid phases produced during voloxidation to support verification of the proposed NO2(g) voloxidation reaction mechanisms. This objective was achieved through using (1) powder X-ray diffraction and Raman spectroscopy to identify bulk uranium phases and (2) scanning electron microscopy to describe the morphology and microstructure of the powders at each reaction stage. The initial oxidation of UO2 under NO2(g) reactions produced ε-UO3. Further exposure to NO2(g) did not nitrate the solid to produce uranyl nitrate, as reported in some literature. However, after the powder was hydrated with steam and then further exposed to NO2(g), some traces of uranyl nitrate hexahydrate were found. The results of this study suggest that surface hydration of powders plays a vital role in uranyl nitrate formation under voloxidation conditions and raises questions about the kinetics of the oxide-to-nitrate voloxidation conversion process. Future chemical and engineering design decisions for the voloxidation process may benefit from an improved understanding of these chemical mechanisms.
19 October 2020 in Environmental Science: Nano
Comprehensive thermodynamic understanding of nuclear materials is paramount for long-term management of legacy nuclear waste and commercial spent nuclear fuel. Actinide oxides (AnO2(s)) are ubiquitous materials throughout the nuclear fuel cycle, yet existing thermodynamic data has noticeable discrepancies, creating uncertainty in environmental prediction of the fate of nuclear materials. The microstructure of actinide oxides, particularly neptunium (Np) and plutonium (Pu), is rarely investigated using high resolution electron microscopy, but such features may illuminate why differences in solubility measurements persist. The aim of this study was to synthesize NpO2(s) at varying calcination temperatures, characterize the materials using high resolution electron microscopy, and perform batch solubility studies to measure total dissolved Np as a function of calcination temperature. The current work demonstrates the sizable differences in dissolution of NpO2(s) based on process conditions, such as the temperature at which the material is calcined and resultant particle size, and the need for more thorough evaluation of the microstructure of solid phases used to generate thermodynamic data of actinides.
7 November 2022 in Frontiers in Nuclear Engineering
Deep space exploration requires specialized sources for both thermal and power applications. Radioactive decay heat of plutonium-238 (238Pu) provides these sources in the form of radioisotope thermoelectric generators (RTGs). The238Pu is producedvianeutron capture reaction involving neptunium-237 (237Np) target material. Continual optimization of237Np target materials and evaluation of potential alternative targets for production of238Pu RTGs are advantageous for meeting ongoing space power system resource requirements. Current production of238Pu for RTGs for the United States space program utilizes neptunium dioxide (237NpO2) targets; however, the use of neptunium mononitride (237NpN) presents an opportunity to increase the mass of237Np per target compared to the dioxide form, as well as increase the thermal conductivity of the target. To assess the viability of a237NpN target material, the material chemistry must be thoroughly evaluated, including synthesis methods and dissolution and reprocessing schemes. This review presents a summary of synthesis pathways for237NpN based on published literature on actinide mononitrides. Specific literature on237NpN is limited, necessitating evaluation of other actinide systems to gather parallels. This suggests a need for additional experimental studies on237NpN. A particular limitation in the existing literature is a lack of information on the differences in material characteristics, such as morphology, particle size, and trace chemical impurities, as a function of synthesis method. These parameters may affect subsequent reactor performance or dissolution of irradiated targets. The evaluation of existing literature is presented with a focus on the efficacy of237NpN targets for238Pu production.