1 December 2005 in International Journal of Geomechanics
This study investigates the relationship between the sediment resisting force and embedment depth for horizontal cylinders in a vertical trench. Plane-strain calculations of collapse loads are performed for a series of trench depths. Collapse load predictions are based on finite element predictions validated by upper and lower bound solutions from classical plasticity theory. This study extends work by previous investigators by considering variable soil shear strength profiles and embedment depths exceeding one cylinder radius. Curve fits are applied to the finite element predictions to develop simplified equations relating collapse load to trench depth. The predictions are relevant to a number of applications, including pipeline penetration, waste disposal, and mine detection.
15 September 2003 in International Journal for Numerical and Analytical Methods in Geomechanics
1 January 2010 in Journal of Geotechnical and Geoenvironmental Engineering
This paper presents an analysis of the load capacity and trajectory of a drag embedment anchor in a soft seabed. Anchor capacity relationships are developed for an idealized anchor comprising a rectangular fluke and a cylindrical shank. Geometric variables considered for the anchor include fluke length, fluke thickness, shank length, angle between fluke and shank, and shank thickness. Parametric studies are presented investigating the effect of these variables on anchor capacity and performance. A method of anchor trajectory prediction during drag embedment is developed by considering anchor behavior in conjunction with the mechanics of the anchor line. The anchor trajectory simulations indicate that an equilibrium condition rapidly develops during embedment in which the rate of anchor rotation is identical to the rate of change in the anchor line uplift angle at the shackle point. At the equilibrium state, the anchor load capacity normalized by soil strength remains constant and the anchor is in a state of incipient rotation. The anchor line angle at the seabed also influences anchor trajectory. This angle varies throughout embedment according to the mechanics of the anchor line in both the seabed and the water column.
1 May 2009 in International Journal of Geomechanics
Fatigue stresses associated with extreme storms, vessel movements, and vortex-induced vibrations are critical to the performance of steel catenary risers. The critical location for fatigue damage often occurs within the touchdown zone, where cyclic interaction of the riser with the seabed occurs. Developing a model for seabed stiffness requires characterization of a number of complex nonlinear processes including trench formation, nonlinear soil stiffness, soil suction, and breakaway of the riser from the seafloor. The analytical framework utilized in this research considers the riser-seafloor interaction problem in terms of a pipe resting on a bed of springs, the stiffness characteristics of which are described by nonlinear load-deflection (P-y) curves. The P-y model allows for first penetration and uplift, as well as repenetration and small range motions within the bounding loop defined by extreme loading. The backbone curve is constructed from knowledge of the soil strength, the rate of strength increa...
1 February 2012 in Journal of Geotechnical and Geoenvironmental Engineering
Suction embedded plate anchors (SEPLAs) allow for accurate positioning, thus providing an attractive alternative to traditional drag embedment anchors. This paper presents an analytical model for predicting the behavior of SEPLAs during the keying process, with a specific focus on predicting the loss of embedment depth as the anchor rotates from its initial vertical position to its target orientation perpendicular to the direction of loading. The soil is idealized as an incompressible, rigid-plastic material obeying an associated-flow rule. A generalized plastic limit analysis is employed to estimate the trajectories and corresponding capacities of SEPLAs under different loading conditions. The effects of soil resistance on the shank and anchor interaction with the anchor chain are also considered in the model. The SEPLA design commonly features a hinged flap; the effect of the flap is examined theoretically by comparing the solutions for the SEPLA with and without flap. Predicted solutions are shown in reasonably good agreement with some published numerical and experimental results, supporting the validity of the model.
1 June 2006 in Journal of Geotechnical and Geoenvironmental Engineering
The need for obtaining estimates of undrained shear strength of shallow seafloor sediments often arises in offshore engineering practice. Impact penetrometers offer a promising means of obtaining strength estimates in such sediments. However, variable conditions of embedment and velocity require careful consideration in the interpretation of impact penetration tests. This paper presents an analysis of the expendable bottom penetrometer (XBP), a device that measures acceleration during impact penetration. The analyses indicate that acceleration measurements can be reasonably related to undrained shear strength of soft clays. Further, acceleration measurements can be integrated to obtain velocity and embedment depth data at any point during the penetration analysis, thereby providing a basis for accounting for rate and embedment effects. Applying the proposed analysis to data from a series of test sites in the Gulf of Mexico indicate satisfactory agreement between XBP and reference strength profiles in soft clays.