2 February 2018 in New Journal of Chemistry
In the present work, a novel cardanol based benzoxazine was synthesised by reacting three different amines (aniline (CrAb), N,N-dimethylaminopropylamine (CrDb) and caprolactam modified N,N-dimethylaminopropylamine (CrCb)) with cardanol in the presence of formaldehyde under appropriate experimental conditions. The resulting benzoxazines were characterised for their molecular structure and thermal behaviour using different analytical methods. Among the different systems studied, the tertiary amine derivatives were found to reduce the curing temperature efficiently (CrAb-275 °C > CrDb-265 °C > CrCb-251 °C) and were confirmed by DSC analysis. These cardanol based CrAb benzoxazines were blended with conventional benzoxazines (Bzs) and bismaleimides (BMIs) as binary and ternary systems and their thermal properties were studied. Three different catalysts (4-hydroxy acetophenone, 4-aminophenol, and 4-hydroxyphenyl maleimide) were used to study the effect of lowering the curing temperature. Further, the prepared benzoxazines were reinforced with varying weight percentages (1, 3, 5 and 10 wt%) of bio-silica derived from rice husk to obtain hybrid composites. The dielectric studies of bio-silica reinforced cardanol benzoxazines infer that the values of dielectric constant decreased with increasing wt% of bio-silica. It was further observed that 10 wt% bio-silica reinforced cardanol benzoxazines show the lowest value of dielectric constant of 1.9 at 1 MHz. From the data obtained from the different studies, it is concluded that the blends of cardanol based benzoxazines can be used in the form of sealants, encapsulants, adhesives and matrices in the fields of microelectronics and automobile applications for better performance.
20 December 2012 in Journal of Materials Chemistry A
Molecular engineering of conjugated polymers for tuning their energy bands is an important process in the quest for highly efficient bulk heterojunction (BHJ) polymer photovoltaic devices. One effective approach is to construct a conjugated polymer by conjugating two chemical units possessing different electron donating (donor) and accepting (acceptor) capabilities. Conjugated copolymers featuring donor–acceptor (D/A) subunits are promising materials for solar cell applications because of their tunable energy bands and solubility that can be tailored to the performances of the photovoltaic devices. Under proper processing conditions, the conjugated polymers with rigid and planar D/A segments can undergo self-assembly to form crystalline structures that improve charge carrier mobility and provide better resistance to the permeation of water and oxygen compared to amorphous polymers. Conjugated polymers with D/A structure have been investigated thoroughly over the last few years. In this highlight, we present an overview of recent developments in BHJ organic photovoltaics employing D/A crystalline copolymers as active layer materials for photon-to-electron conversion, with particular emphasis on crystalline D/A polymers featuring newly developed acceptor structures, including thieno[3,4-c]pyrrole-4,6-dione, diketo-pyrrole-pyrrole, bithiazole, thiazolothiazole and thieno[3,2-b]thiophene moieties, and conclude with future perspectives.
9 August 2017 in Industrial & Engineering Chemistry Research
3 September 2018 in Journal of Applied Polymer Science
13 April 2017 in Polymer Bulletin
2 August 2019 in Journal of Polymer Research