30 November 2022 in IEEE Transactions on Microwave Theory and Techniques
A millimeter-wave (mmW) 3-D imaging system using high scanning-rate leaky-wave antennas in a frequency-diverse multiple-input–multiple-output (MIMO) antenna configuration is proposed. A novelty of the approach is the use of high scanning-rate leaky-wave antennas combined with MIMO to obtain both frequency and spatial diversities. Furthermore, an extended Rytov approximation (xRA), recently shown to provide accurate reconstructions for high permittivity and electrically large-sized low-loss objects, is also included in the approach. Compared with frequency-diversity-only and spatial-diversity-only imaging systems, the proposed system can provide enhanced imaging performance by leveraging both spatial and frequency diversities simultaneously. In addition, the imaging time and hardware cost can be significantly reduced, resulting in a low-cost mmW imaging system. The formulation for the 3-D imaging system is simplified to a scalar form by leveraging the polarization of the leaky-wave antennas and the polarization dominance of the scattered wave components, allowing xRA to be formulated.Sensing capacity and correlation coefficient evaluation methods are used to estimate the performance of the high scanning-rate leaky-wave MIMO imaging system. The scalar formulation also allows us to straightforwardly compare MIMO microwave imaging with MIMO radar to highlight the commonality between them. Numerical and experimental examples demonstrate that the proposed system with xRA can accurately estimate the contrast function amplitude and the positions of dielectric scatterers in a 3-D imaging region using two transmit and 11 receive leaky-wave antennas and 49 frequency samples within the 37.2–42-GHz frequency range.
29 March 2023 in IEEE Internet of Things Journal
Direction-of-arrival (DoA) estimation is essential in many industrial internet of things (IIoT) applications where IoT users may require a high-resolution estimation algorithm for features limited to positioning and device localization. The conventional DoA estimation is challenging as the number of antenna arrays increases leading to an increase in design complexity and cost in RF circuitry. As a result, the conventional DoA estimation algorithms may not be suited for IIoT applications. In this work, a joint DOA and carrier frequency offset (CFO) schemes is introduced for typical uplink IIoT systems by equipping the receiver with a leaky-wave antenna (LWA). By considering that the LWA can simultaneously steer its beam direction towards the active user. As a result, each user is estimated independently. The joint algorithm is developed based on the high-resolution MUSIC scheme, which utilizes the LWA properties to compute the DoA spectrum. Furthermore, we develop an iterative CFO estimation approach as the desired solution to a multi-dimensional search. Subsequently, we further formulate the Cramer–Rao lower bounds (CRLB) to serve as a performance benchmark for the accuracy of the proposed scheme. The SDR platform is provided to validate the proposed algorithm in real-time. Finally, the simulation results and the SDR experiments justify that the proposed scheme offers more robustness than conventional counterparts with linear array antenna, which achieves a root mean square error (RMSE) approach to the derived CLRB, especially at a medium signal-to-noise ratio (SNR) range which suited for IIoT applications.