1 December 2019 in Physics Letters A
15 November 2023 in Nanotechnology
Near-field lithography has evident advantages in fabricating super-resolution nano-patterns. However, the working distance (WD) is limited due to the exponential decay characteristic of the evanescent waves. Here, we proposed a novel photolithography method based on a modified photonic crystal (PC), where a defect layer is embedded into the all-dielectric multilayer structure. It is shown that this design can amend the photonic band gap and enhance the desired high-k waves dramatically, then the WD in air conditions could be extended greatly, which would drastically relax the engineering challenges for introducing the near-field lithography into real-world manufacturing applications. Typically, deep subwavelength patterns with a half-pitch of 32 nm (i.e., λ/6) could be formed in photoresist layer at an air WD of 100 nm. Moreover, it is revealed that diversified two-dimensional patterns could be produced with a single exposure using linear polarized light. The analyses indicate that this improved dielectric PC is applicable for near-field lithography to produce super-resolution periodic patterns with large WD, strong field intensity, and great uniformity.
24 August 2024 in Optics Communications
5 June 2025 in Optics Express
The versatile photonic crystals are quite attractive, especially in regulating the transmission of light. Here, a supercell photonic crystal (SPC) composed of ternary dielectric multilayers is proposed for manipulating the evanescent waves, and demonstrated experimentally in super-resolution photolithography forwhat we believe to be the first time. Based on the spatial frequency selection function of the SPC, only the anticipant diffracted waves with high-k could be propagated, making it possible to produce sub-diffraction-limited patterns with high uniformity and contrast. Benefited from the low-loss character of the dielectric multilayers, the selected high-k waves can be transmitted subsequently through a long air distance. Besides, the asymmetric arrangement of SPC also leads to the multilayers performing satisfactory thickness robustness, which can greatly relax the requirement in preparation. Combining optimized grating masks, sub-diffraction-limited patterns with a half-pitch of ?65 nm (?0.16?) could be obtained from both 1st and 2nd order diffracted waves under situations where the working distance reaches 160 nm, which will significantly alleviate the difficulty in mechanical control and mask fabrication. This work shows the functional versatility of SPC and presents a feasible way in manipulating evanescent waves. It is also meaningful for promoting super-resolution photolithography towards practical application.
26 June 2025 in Optical Materials Express
Direct writing lithography plays a crucial role in the fabrication of arbitrary nano-patterns. In order to improve the resolution, a quasi-periodic photonic crystal (QPC) multilayer structure is proposed for manipulating the evanescent waves, which could be used in direct writing lithography by companying with a concentric annular grating. Because of the low loss and spatial frequency selection function of the QPC multilayers, only the desired high-k diffracted waves generated by the grating could be passed through and propagated over a long distance. Eventually, a focused light beam with a sub-diffraction limited full width at half maximum (FWHM) could be formed in the final photoresist (PR) layer. The calculated results show that the FWHM of the focused light beam could be reduced to ∼96 nm (0.23λ), and the sidelobe ratio is less than 13%. In addition, the shape characteristics of the focused light beam in PR could be maintained excellently, and the penetration depth could reach 300 nm. This work presents a new applicative scene in photolithography for photonic crystals. Meanwhile, the sub-diffraction limited feature of the focused beam indicates the strategy is feasible for controlling the evanescent waves.
13 May 2022 in Journal of the Optical Society of America B
The circular dichroism (CD) produced by chiral materials in nature is usually very weak, and is not easy to be detected and analyzed in experiment. In this paper, a catenary-shaped chiral metasurface (CCMS) is proposed to achieve giant CD. The unit of the CCMS is composed of a metal–insulator–metal structure. Its upper and lower layers are composed of catenary-shaped metal elements. Under the excitation of left circularly polarized light and right circularly polarized light, the coupling modes of the equivalent electric dipole moments on the upper and lower metal surfaces are different, which leads to giant CD approaching 0.55. In addition, the CD properties can be tuned by structure parameters, such as the thickness of the intermediate dielectric layer, the length of the catenary-shaped metal elements, the twisted angle of the catenary-shaped metal surfaces of the upper and lower layers, and the period of the structure. By optimizing structure parameters, the maximum CD signal can reach 0.68. The present results would be helpful for designing chiral structures with enhanced CD signal.