This study examines the effect of leakage current reduction techniques on the performance of the nanosheet FETs (NS-FETs) at 3 nm and beyond. We study the effects of the punchthrough stopper (PTS) and bottom dielectric isolation (BDI) schemes on stress and self-heating. We have developed a new simulation flow based on quantum correction of Monte Carlo (MC) simulation and calibration of drift diffusion model. We calibrate the simulation results with the latest available published experimental data. BDI was found to lower the average channel stress by 85% and reduced drive current compared with PTS with ideal source/drain (S/D) stressors. The impact of nonideal, defective S/D stressors on the development of channel stress of PTS is also covered in this article. We also found that the BDI structure raises the lattice temperature dramatically compared with the PTS structure at the same dc bias current level. The performance of the BDI structure is improved by introducing metal S/D to increase the contact area between M0 and S/D epi, leading to a significant improvement in lattice temperature, drive current, and RC delay up to 30%.
Thermal and mechanical properties play a key role in optimizing the performance of nanoelectronic devices. In this study, the lattice thermal conductivity (κL) and elastic constants of Si nanosheets at different sheet thicknesses were determined using recently developed machine learning interatomic potentials (MLIPs). A Si nanosheet with a minimum thickness of 10 atomic layers was used for model training to predict the properties of sheets with greater thicknesses. The training dataset was efficiently constructed using stochastic sampling of the Born-Oppenheimer potential energy surface. Density functional theory calculations were used to extract the MLIP, which served as the basis for further analysis. The moment tensor potential method was used to obtain the MLIP in this study. The results showed that, at sub-6 nm sheet thickness, the thermal conductivity dropped to ~7% of its bulk value, whereas some stiffness tensor components dropped to ~3% of the bulk values. These findings contribute to the understanding of heat transport and mechanical behavior of ultrathin Si nanosheets, which is crucial for designing and optimizing nanoelectronic devices. The technological implications of the extracted parameters on nanosheet field-effect transistor performance at advanced technology nodes were evaluated using TCAD device simulations.