Although three-dimensional metal halide perovskite (ABX3) single crystals are promising next-generation materials for radiation detection, state-of-the-art perovskite X-ray detectors include methylammonium as A-site cations, limiting the operational stability. Previous efforts to improve the stability using formamidinium–caesium-alloyed A-site cations usually sacrifice the detection performance because of high trap densities. Here we successfully solve this trade-off between stability and detection performance by synergistic composition engineering, where we include A-site alloys to decrease the trap density and B-site dopants to release the microstrain induced by A-site alloying. As such, we develop high-performance perovskite X-ray detectors with excellent stability. Our X-ray detectors exhibit high sensitivity of (2.6 ± 0.1) × 104 μC Gyair−1 cm−2 under 1 V cm−1 and ultralow limit of detection of 7.09 nGyair s−1. In addition, they feature long-term operational stability over half a year and impressive thermal stability up to 125 °C. We further demonstrate the promise of our perovskite X-ray detectors for low-bias portable applications with high-quality X-ray imaging and monitoring prototypes.
10 July 2019 in The Journal of Physical Chemistry C
A group of bifunctional oxygen evolution/reduction reaction single-atom catalysts supported on C 2 N, is proposed. The origin of their high catalytic activity is elucidated by density functional theory calculations and machine learning modelling.
12 March 2019 in Angewandte Chemie International Edition
The utilization of 2D materials as catalysts has garnered significant attention in recent years, primarily due to their exceptional features including high surface area, abundant exposed active sites, and tunable physicochemical properties. The unique geometry of 2D materials imparts them with versatile active sites for catalysis, including basal plane, interlayer, defect, and edge sites. Among these, edge sites hold particular significance as they not only enable the activation of inert 2D catalysts but also serve as platforms for engineering active sites to achieve enhanced catalytic performance. Here it is comprehensively aimed to summarize the state‐of‐the‐art advancements in the utilization of edge sites on 2D materials for electrocatalysis and photocatalysis, with applications ranging from water splitting, oxygen reduction, and nitrogen reduction to CO2 reduction. Additionally, various approaches for harnessing and modifying edge sites are summarized and discussed. Here guidelines for the rational engineering of 2D materials for heterogeneous catalysis are provided.
7 October 2021 in Journal of Materials Chemistry A
The practical applications of lithium–sulfur (Li–S) batteries are greatly hindered by the poor conductivity of sulfur, the shuttling of lithium polysulfides (LiPSs), and the sluggish kinetics in the charge–discharge process. In order to solve these problems, here we propose the surface-functionalized V2N MXenes as the host materials to improve the electrochemical performance of Li–S batteries. Based on the density functional theory (DFT) calculations, we found that both the bare and functionalized V2NT2 (T = O, F, OH, and S) exhibit metallicity, and three of them (V2NO2, V2NF2, and V2NS2) possess moderate LiPS adsorption strength, which thermodynamically benefits the suppression of the dissolution and shuttling of LiPSs. Besides, V2NS2 shows the lowest Gibbs free energy barrier for the sulfur reduction reaction (0.49 eV) during discharge, which kinetically suppresses the dissolution and shuttling of LiPSs by expediting the decomposition process from soluble LiPSs to insoluble ones. Moreover, surface functionalized V2NT2 also exhibits outstanding catalytic ability for Li2S decomposition during charge, which decreases the energy barrier from 3.64 eV (bare V2N) to 1.55 (V2NO2) and 1.19 eV (V2NS2), and increases the charging kinetics. Based on these results, V2NS2 monolayers are suggested as promising host materials for S cathodes due to the fast charge/discharge kinetics and effective suppression of LiPS shuttling. This theoretical study provides further insight into the application of nitride MXenes and other two-dimensional materials as conductive anchoring materials for Li–S batteries.