A software-based method for estimating and compensating for chirp non-linearity in frequency-modulated continuous wave radars is described. The method is based on the phase-gradient algorithm and time-domain warping of the dechirped signal. The method is demonstrated both on typically and severely non-linear chirps. The retrospective application is demonstrated on archive radar data.
A ground‐based millimetre wave radar, AVTIS (All‐weather Volcano Topography Imaging Sensor), has been developed for topographic monitoring. The instrument is portable and capable of measurements over ranges up to ∼7 km through cloud and at night. In April and May 2005, AVTIS was deployed at Arenal Volcano, Costa Rica, in order to determine topographic changes associated with the advance of a lava flow. This is the first reported application of mm‐wave radar technology to the measurement of lava flux rates. Three topographic data sets of the flow were acquired from observation distances of ∼3 km over an eight day period, during which the flow front was detected to have advanced ∼200 m. Topographic differences between the data sets indicated a flow thickness of ∼10 m, and a dense rock equivalent lava flux of ∼0.20 ± 0.08 m3s−1.
We present the development and field testing results of a dual-mode radar/radiometric imager operating at 94GHz. This instrument combines an FMCW radar with a total power radiometer in a compact, portable unit which is designed for ground based remote sensing. The radar produces range maps with a range bin resolution of 1m out to a maximum range of approximately 5km and target reflectivity can also be retrieved. The radiometer produces co-aligned thermal images of the scene with a thermal resolution of the order of one kelvin. The instrument, which uses a single 0.45m Cassegrain antenna, is rastered over the scene using a commercial pan and tilt gimbal. Image acquisition times are of the order of tens of minutes. The principal application for which the instrument was designed is to survey volcanic lava domes, irrespective of weather conditions - it has been named AVTIS for All-weather Volcano Topography Imaging Sensor. We will present results obtained with AVTIS from the SoufriÂre Hills Volcano, Montserrat, as well as more general terrain mapping imagery gathered locally in Scotland. Besides volcano surveying, AVTIS could be deployed for other remote sensing applications.