Implementation of wide band satellite telemetry data receiver with re-configurability for different data rates is presented in this paper, which can be used by the educational institutions for downloading telemetry data from small satellites to carryout research. The design is based on SDR and Matlab Simulink and it is designed to receive data from satellites in UHF/VHF and S-Bands. For UHF/VHF frequencies the signal is directly feed to SDR, whereas for receiving S-Band (2200MHz-2300MHz), a frequency down-converter is used to get IF signal of 70MHz. The In-phase and Quadrature samples from SDR USB port are fed to Matlab Simulink, followed by symbol timing, carrier and frame synchronization are carried out in Matlab. In this paper implementation of BPSK demodulation is demonstrated for different data rates.
This paper presents a ground-breaking triple-bandpass filter design utilizing a modified T-shape rectangular coupled with a stepped impedance resonator (MTSR-CSIR) for smart portable communication device applications. The MTSR-CSIR filter operates at (2.2, 3.62 and 4.6) GHz, providing wide passbands in three operating modes. To achieve the optimal performance, the filter design is executed on a multi-layered liquid-crystal polymer (LCP) substrate with a thickness of 50 µm, dielectric constant of 2.9 and loss tangent of 0.002. Simulation results for the MTSR-CSIR filter demonstrate a high level of accuracy and consistency with the measurement results for the fabricated filter. The filter exhibits an excellent stopband rejection, low loss and compact size while maintaining high-performance levels. Its performance parameters, such as insertion loss, return loss and group delay, are considered to evaluate the filter’s performance. The results highlight the applicability of the MTSR-CSIR filter for smart portable communication devices.