1 January 2016 in Materials & Design
HRHernán A. González Rojas
27 May 2015 in The International Journal of Advanced Manufacturing Technology
This paper explores the effects on the surface roughness, hardness and residual stress of G10380 steel specimens milled and treated with a ball-burnishing process assisted by vibrations. These vibrations are incorporated through the attachment of an induced coil module to a conventional burnishing tool, with forces transmitted through a pre-loaded spring. A positive effect of vibrations on the improvement and efficiency of the burnishing treatment is demonstrated, empirically proving that the vibrations introduce additional energy into the system that aids with displacements along the surface of the material to reallocate the crystalline structure. Significant results are found in terms of final surface roughness, which is highly improved in comparison to conventional burnishing treatments, even with fewer passes and a significant time reduction. Less robust results are observed in terms of specimen hardness and residual stress, but future improvements could be derived with a thorough development of the vibration system.
15 May 2014 in Metallurgical and Materials Transactions A
1 April 2015 in Materials and Manufacturing Processes
Burnishing processes are effective methods for treating pieces to increase their durability and roughness. Studies reveal that traditional burnishing can be strongly improved with the assistance of external energy sources. A vibrating module was attached to a classical burnishing tool and was tested on aluminum specimens to find the optimal vibration-assisted burnishing parameters. Vibration caused roughness improvements of the specimens and decreased the processing time by fivefold compared to traditional burnishing. At the tested frequency, no significant consequences were found on hardness and residual stresses.
18 September 2017 in Journal of Manufacturing Science and Engineering
Electrically assisted (EA) wire drawing process is a hybrid manufacturing process characterized by enhancement of the formability, ductility, and elongation of the wire drawn specimen. A thermomechanical model to describe the change of the mechanical response due to the thermal contribution is proposed in this work. Additionally, a numerical simulation was conducted to study the potential and limitations of this hybrid process by using two different hardening laws: a phenomenological and a dislocation-based hardening laws. The results show how the flow stress, the effective plastic strain, and residual stresses behave under the electroplusing effect. In addition, electron backscattered diffraction was used to study the electropulsing treatments on the microstructure during cold drawing. It is observed a decrease of the high- and low-angle grain boundaries (LAGB) for samples deformed with electropulsing. This detwinning process has a strong influence on the strain hardening by improving the material formability. It was shown that the two proposed hardening laws adequately describe the EA wire drawing process showing a similar mechanical behavior. Nevertheless, the dislocation-based hardening law has the potential to be generalized to many other material and process configurations without extensive number of material tests as the phenomenological hardening law would require.
1 April 2019 in Journal of Materials Research and Technology
JSJavier Walter Signorelli