Background/aim: To present the incidence of recurrent lumbar disc herniation (RLDH) and to identify radiological and patient-related risk factors that lead to recurrence after lumbar disc herniation (LDH) treatment with microdiscectomy. Materials and methods: Between January 2013 and December 2021, 1214 patients who had undergone microdiscectomy for LDH were included in this retrospective study. Patients were divided into two groups, the recurrent group and the non-recurrent group, and their demographic, clinical and radiologic characteristics were recorded. The association between the variables and RLDH was assessed by univariate and multivariable logistic regression analyses. Results: Mean ages were similar in the recurrent (51.48 ± 13.63) and non-recurrent(50.38 ± 14.53) groups (p=0.232). Males represented 59.6% of the recurrent group and49.8% of the non-recurrent group (p=0.002). Multivariable logistic regression revealedthat being a male (p=0.009), diabetes mellitus (p=0.038), smoking (p<0.001), grade 4&5disc degeneration (p<0.001), and having protruded (p=0.002), extruded LDH (p<0.001),paracentral (p=0.008) and foraminal LDH (p=0.008) were independently associated withrecurrence. Conclusion: To reduce RLDH frequency and need for revision surgery, modifiable riskfactors should be minimized before and after the initial surgery. Also, in patients withunmodifiable risk factors, patients should be clearly informed about the risk forrecurrence and possible alternative treatment methods should be considered.
29 December 2022 in Harran Üniversitesi Mühendislik Dergisi
Çalışmanın amacı, imalat sanayinde yaygın olarak kullanılan metal tozlarının daha ekonomik bir yöntemle elde edilebilirliğini göstermektir. Bu çalışmada su atomizasyon yöntemi ile metal tozu üretimi için bir ısıl fırın ve demir pota tasarımı ve imalatı yapılmıştır. Fırın tasarımında yüksek ergime sıcaklığına sahip nikel-krom direnç telleri ve ısı randımanını sağlamak amacıyla yüksek ısıya dayanıklı fırın taşları kullanılmıştır. Düşük maliyetinden dolayı demir malzemeden yapılan potanın anlık sıcaklık takibi termokupullar ile sağlanmıştır. Sonuç olarak düşük erime sıcaklığına sahip metallerin kontrollü bir biçimde ergitildiği fırın-pota sistemi tasarlanıp imal edilmiştir