Željko Alar

Željko Alar

Auto-generated profile, based on publicly available information

Željko Alar

Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 5, 10000 Zagreb, Croatia

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2017 in Metals
Verified
Journal Article
Open access
PDF file
ŽAŽeljko Alar
Željko Alar
VAVesna Alar
Vesna Alar
TFTamara Aleksandrov Fabijanić
Tamara Aleksandrov Fabijanić
In this paper, the electrochemical corrosion resistance of near-nano and nanostructured WC-Co cemented carbides was investigated. WC powders with an average grain size dBET in the range from 95 nm to 150 nm and with an addition of vanadium carbide (VC) and chromium carbide Cr3C2 as grain growth inhibitors were used as starting powders. The mixtures with 6 wt. % and 9 wt. % Co were consolidated by two different processes; sintering in hydrogen atmosphere and the sinter-HIP process. WC-Co samples were researched by direct current and alternating current techniques in the solution of 3.5% NaCl at room temperature. Corrosion parameters such as corrosion potential (Ecorr), corrosion current density (jcorr) and polarization resistance (Rp) were determined by electrochemical techniques. From the conducted research, it was found that the consolidation processes and microstructural characteristics—grain growth inhibitors, grain size of the starting WC powders and η-phase—influenced the electrochemical corrosion resistance. η-phase enhanced the formation of a passive layer on the samples’ surfaces, thereby reducing the tendency of the sample dissolution and increasing the stability of oxides forming therewith a passive layer on the sample surface.

3 July 2018 in Metals
Verified
Journal Article
Open access
PDF file
ŽAŽeljko Alar
Željko Alar
DMDavor Mandić
Davor Mandić
Tensile and impact properties of API 5L X80 steel were investigated and compared in order to evaluate their relation. Yield and maximum forces under dynamic impact testing were obtained from force-displacement curves. Dynamic yield strength was estimated using the von Mises yield criterion. A different approach was taken in order to estimate the dynamic tensile strength; the instrumented RKP 450 Zwick/Roell machine was used for this specific purpose. From the 10-mm-thick steel plate, Charpy V notch (CVN) samples were cut off in longitudinal orientation considering the rolling direction. For this research, CVN specimens were machined according to the ISO 148:2016 standard. Tensile specimens were machined according to the ISO 6892-1:2016 standard. It was found that the results between the tensile and impact properties were very close and within 5%.