1 July 2016 in Computer Methods and Programs in Biomedicine
7 October 2016 in Structural Health Monitoring
HLHelder Barbieri Lacerda
The impedance-based structural health monitoring method has become a promising and attractive tool for damage identification and is considered a nondestructive evaluation technique. However, conventional impedance-based structural health monitoring studies have mainly focused on structural damage identification but not so much on statistical modeling approaches in order to determine a threshold for the decision making of the damage detection system. In this study, the impedance-based structural health monitoring technique is used in a damage detection problem considering temperature variation effects. For this aim, three aluminum 2024-T3 plates were instrumented with small lead zirconate titanate patches close to their borders, and damage was introduced in the central position of the plates, with temperature ranging from −10°C to 60°C. This article proposes a method to statistically determine a threshold for damage detection purposes using concepts of statistical process control, as well as confidence intervals and normality tests in order to obtain a diagnosis with a previously determined confidence level. Thus, this work presents a sensitivity evaluation of the impedance-based structural health monitoring technique as applied to aluminum plates under varying temperature. With the technique proposed, damage threshold levels are determined so that lead zirconate titanate patches placed approximately 280 mm from the damage inserted were able to detect saw cuts of approximately 7 mm long, with 95% confidence intervals inside the temperature range considered.
14 March 2019 in Engineering Optimization
MSMárcio Aurelio da Silva
Probabilistic and non-probabilistic methods have been proposed to deal with design problems under uncertainties. Reliability-based design and robust design are probabilistic strategies traditionally used for this purpose. In the present contribution, reliability-based robust design optimization (RBRDO) is formulated as a multi-objective problem considering the interaction of both approaches. The proposed methodology is based on the differential evolution algorithm associated with two strategies to deal with reliability and robustness, respectively, namely inverse reliability analysis and the effective mean concept. This multi-objective optimization problem considers the maximization of reliability and robustness coefficients as additional objective functions. The effectiveness of the methodology is illustrated by two classical test cases and a rotor-dynamics application. The results demonstrate that the proposed methodology is an alternative method to solve RBRDO problems.
2 April 2018 in Journal of Intelligent Material Systems and Structures
MAMarco Túlio Santana Alves
Marco Túlio Santana Alves
MSMarina Castro dos Santos
The present contribution is devoted to the study of the influence of shape memory alloys on the dynamic behavior of flexible rotors. In this sense, a suspension composed by pseudoelastic shape memory alloy wires that are connected to a rotor-bearing test rig was designed. To evaluate the performance of the system, both numerical and experimental investigations are carried out. The suspension stiffness can vary, especially in the pseudoelastic region, so that this variation takes place per a hysteretic cycle denoting energy dissipation whenever the loading magnitude is sufficient to induce a phase transformation. The constitutive model used to describe the shape memory alloy behavior is a modified version of the Brinson model for the one-dimensional case. To provide all thermomechanical properties of shape memory alloy wire, a complete characterization process was performed. Due to numerical reasons, the size of the model of the rotating system was reduced. Finally, numerical and experimental results demonstrate the success of shape memory alloy applied to the suspension of rotating machines as an interesting alternative for vibration control.
1 March 2020 in Composite Structures
VCVergílio T.S. Del Claro
22 March 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering