21 August 2019 in MATEC Web of Conferences
The most commonly used technology among the additive manufacturing is Direct Metal Laser Sintering (DMLS). This process is based on selective laser sintering (SLS). The method gained its popularity due to the possibility of producing metal parts of any geometry, which would be difficult or impossible to obtain by the use of conventional manufacturing techniques. Materials used in the elements manufacturing process are: titanium alloys (e.g. Ti6Al4V), aluminium alloy AlSi10Mg, etc. Elements printed from Ti6Al4V titanium alloy find their application in many industries. Details produced by additive technology are often used in medicine as skeletal, and dental implants. Another example of the DMLS elements use is the aerospace industry. In this area, the additive manufacturing technology produces, i.a. parts of turbines. In addition to the aerospace and medical industries, DMLS technology is also used in motorsport for exhaust pipes or the gearbox parts. The research objects are samples for static tests. These samples were made of Ti6Al4V alloy by the DMLS method and the rolling method from a drawn rod. The aim of the paper is the mechanical properties comparative analysis of the Ti6Al4V alloy produced by the DMLS method under static loading conditions and microstructure analysis of this material.
21 February 2019 in AIP Conference Proceedings
The paper presents the experimental tests results of aluminum alloy EN AW-5754 sample strength. The test specimens were made of metal sheet with a thickness 3.9 mm. The tinware joining process was carried out based on the method 131 for two different welding parameters. The first set of welding parameters (option A): voltage U = 25 V, current intensity I = 160 A, linear welding speed v = 400 mm/min, coefficient k = 0.8, linear welding energy Q = 1280 kJ/mm. The second set of welding parameters (option B): voltage U = 13.5 V, current I = 140 A, linear welding speed v = 62 mm/min, coefficient k = 0.6, linear welding energy Q = 70.3 kJ/mm. The obtained experimental results shows that the welding parameters choice by the method 131 did not affect the strength properties of the joints (including the yield point value Sy0.2). However, it influenced the elongation of the sample A.
6 January 2021 in MATEC Web of Conferences
The aim of the article was to carry out FEM strength tests for four proposed by the authors geometry of the intraoral implant. Change of their geometrical features to find the most optimal distribution of reduced stresses. The article presents various geometries of the new dental implant. Strength tests were performed using the finite element method (FEM). The results of the tests were analyzed and their assessment was made for which of the solutions of the new geometry the stress distribution is the most optimal. Detailed results of the analyzes for a given model are shown and new solutions in the construction of the implant are proposed.
31 March 2025 in Tribologia
The article presents tribological research on the cooperation of a kinematic pair composed of metallic and polymer biomaterials. In the sample tests, a material widely used in orthopaedics and dentistry was used (the medical titanium alloy Ti-6Al-4V obtained both by traditional manufacturing methods, i.e. casting, and the additive manufacturing method SLM/DLMS (3D printing)) and a counter sample (high-density polyethylene PE-UHMW). The friction pair selected in this way was subjected to tribological tests on a PT-3 tribometer under specific operating conditions. After the tribological tests, the change in tribological parameters, i.e. the coefficient of friction or abrasive wear on the surfaces of the tested biomaterials, was evaluated. The obtained results also enabled the assessment of the changes occurring in the geometric structure of the surface of the Ti-6Al-4V/ PE-UHMW friction pair for titanium samples obtained via drawn rod and 3D printing.