Metal halide perovskite light-emitting diodes (PeLEDs) have emerged as prospective candidates for high-resolution display and communication applications because of their tunable bandgaps, high photoluminescence quantum yields (PLQYs), and good color purity.1–5 Since the first report of PeLEDs by Tan et al. in 2014,6 external quantum efficiencies (EQEs) exceeding 20% have been achieved at red and near-infrared wavelengths,7–9 and the state-of-the-art green PeLEDs exhibit outstanding EQEs of over 30%.10 To date, the EQEs of sky-blue perovskites (480 to 500 nm)-based PeLEDs have exceeded 16%;11 however, as one of primary colors, the efficiency and brightness of pure-blue PeLEDs (460 to 470 nm) are still largely lagging behind. Although the EQE of the pure-blue electroluminescent device is over 11%, its brightness is as low as , which severely restricts the development for illumination and display applications ().12 Therefore, it is urgent to develop new strategies to further promote the performance of pure-blue PeLEDs.
Printing materials with circularly polarized light (CPL) emission holds promise for flexible stereoscopic displays and multilevel anticounterfeiting solutions. However, a key challenge lies in developing printable CPL materials that exhibit both high photoluminescence quantum yield (PLQY) and luminescence dissymmetry factor ( glum ) values. In this study, we present the macroscopic and controllable production of efficient full-color CPL carbon dot (CDs) photonic paint materials. These printable CPL materials, consisting of heavy metal-free CDs as emitters, and liquid crystals as host matrices, are produced using a helical coassembly strategy. Our CPL systems based on CDs achieve high PLQY (more than 80%) and glum values (more than 1.4), with a figure of merit (a key performance indicator for CPL properties calculated by multiplying PLQY and glum) of 1.12, outperforming other CPL material systems. Furthermore, the full-color CDs-CPL is successfully used for printing flexible circularly polarized luminous patterns and multilevel anticounterfeiting features. This research provides insights into advanced CPL materials, highlighting their broad potential applications.
Organic–inorganic hybrid metal halides have gained significant attention as downconversion phosphors in solid-state lighting and x-ray imaging due to their unique optical properties. However, achieving efficient luminescence under blue light excitation remains a significant challenge. Herein, we present a novel zero-dimensional hybrid copper iodide [Li(H2O)(Benzo-15-crown-5)2]2Cu4I6 (abbreviated as [LB]2Cu4I6), as a highly efficient and blue-light-excitable emitter with potential in lighting and x-ray imaging applications. This compound exhibits an ultrabroad excitation band spanning from 250 to 500 nm, upon blue light, ultraviolet, or x-ray excitation, delivers strong broadband yellow emission centered at 541 nm with a high photoluminescence quantum yield (PLQY) of 92.1%. Benefiting from their strong photoexcitation under blue light, high PLQY, and good environmental stability, a high-performance white light-emitting diode was developed, achieving a commercial-level luminous efficiency of 101.6 lm W−1, a high color rendering index of 87, and a record half-lifetime of 2352 h. Additionally, [LB]2Cu4I6 demonstrates outstanding x-ray scintillation properties with a high light yield of 83 904 photons MeV−1, a low detection limit of 72.3 nGy s−1, and a competitive spatial resolution of 10.3 lp mm−1 for x-ray imaging. This work provides a new avenue for exploring highly efficient and blue-light-excitable luminescent metal halides toward multifunctional applications.