Hongwen Li

Hongwen Li

Auto-generated profile, based on publicly available information

Hongwen Li

The Key Laboratory of Urban Security and Disaster Engineering, Beijing University of Technology, Beijing 100124, China

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
JHJi Hao
Ji Hao
CJCaiyun Jin
Caiyun Jin
YLYue Li
Yue Li
ZWZigeng Wang
Zigeng Wang
JLJianglin Liu
Jianglin Liu
HLHongwen Li
Hongwen Li
In this paper, the mesocalibration test was used to measure the contact parameters (restitution coefficient, rolling friction coefficient, static friction coefficient, and surface energy) between coarse aggregate particles and mortar particles in Discrete Element Method (DEM) model of concrete. Then, the DEM model of concrete slump was established according to the coarse aggregate gradation to study the flow behavior of coarse aggregate in fresh concrete. The slump test result was compared with the output of the slump DEM model with high consistent, indicating the promising reliability of the mesocalibration test. Finally, based on the mesocalibration test results, the DEM model of pumping concrete was established. It was obtained that the pumping pressure calculated by the numerical model was similar to that of the pumping test with satisfactory accuracy better than the concrete pumping pressure calculated according to the rheological test results of concrete and lubricating layer. On this basis, the movement trajectory of coarse aggregate in the pump pipe was analyzed and the influence of coarse aggregate on the pumping performance of concrete was revealed.

1 August 2013
Verified
Conference Paper
Closed access
HLHongwen Li
Hongwen Li
TZTao Zhang
Tao Zhang
Zhang JinjingZhang Jinjing
Zhang Jinjing
For sludge deposition of standard orifice plate, this paper puts forward the problem of online malfunction diagnosis. Based on calculation of normal working condition and malfunction condition of orifice plate, the relationship between deviation value of the orifice plate discharge coefficient and deposition degree have been concluded by CFD software. In order to implement online diagnosis, another detecting point is installed on downstream of the pressure detecting point of flange. The differential pressure ratio of factor (k) has been calculated which reflects the degree of distortion in flow field caused by deposition. Through analysis of simulation data, empirical formula about factor k with deposition degree Yu has been drawn. Through the formula, online diagnosis of deposition and correction of the measured value can be realized. Real flow experiments verify the effectiveness of the method and its practicability in engineering.