1 November 2019 in IEEE Transactions on Intelligent Transportation Systems
This paper presents a concept, herein called Combined Alternate-Direction Lane Assignment and Reservation-based Intersection Control (CADLARIC), for organizing directionally unrestricted traffic flows in automated vehicle environment. In the proposed concept, vehicles can use lanes traditionally reserved for the opposite direction of travel. This concept allows left and right turning vehicles to align themselves in an appropriate lane before reaching the downstream intersection, so that they can smoothly go through the intersection without having any conflicts with vehicles from the other movements. Conflicts between through movements are handled by a reservation-based algorithm. To simulate the proposed concept, i.e. allow flexibility of such driving maneuvers that cannot be accomplished in the other existing simulation tools, a new microsimulation platform is developed. The proposed CADLARIC control scheme is evaluated through a comparison with a conventional fixed-time signal control and Fully Reservation-Based Intersection Control (FRIC). The results show that CADLARIC: (i) significantly outperforms other control methods in terms of the traffic performance (i.e. delays and stops); and (ii) generates a reduction of conflicting situations at the network level when compared to FRIC.
16 October 2020 in Transportation Research Record: Journal of the Transportation Research Board
Adaptive traffic control systems (ATCSs), have been in use since the late 1970s but have only received significant attention in the U.S. during the last 10 years. Since 2008, the number of these systems has increased by more than 600%. A brief literature review clearly shows a shortage of comprehensive studies that gather data from numerous field evaluations, categorize those evaluations based on several factors, summarize findings, and develop meaningful conclusions. This study addresses this gap by presenting a framework and a tool which enable comprehensive analysis of ATCSs deployed and evaluated in the U.S. Compared with some previous studies, where the focus was on brief and general experiences with ATCSs, the tool presented in this study allows detailed analysis of ATCS deployments and investigation of numerous criteria important for their evaluations. Relevant ATCS data from deploying agencies and literature are collected, discussed, and used to populate a database of the Assessment Tool for Adaptive Traffic Control ([AT]2C). The main purpose of (AT)2C is to help practitioners and researchers to identify, compare, and assess statistics of relevant ATCS technologies, mainly from the perspective of their field benefits.
27 December 2021 in Transportation Research Record: Journal of the Transportation Research Board
Benefiting from opportunities offered by connected and autonomous vehicles (CAVs), a concept called Combined Alternate-Direction Lane Assignment and Reservation-based Intersection Control (CADLARIC) was proposed recently for management of directionally unrestricted traffic flows in urban environments. In CADLARIC, resolution of vehicular conflicts is distributed between links and intersections to prevent intersections from turning into traffic bottlenecks. Although CADLARIC has shown promising results, it has been observed that, once traffic volume on a certain lane reaches “physical capacity,” adding more traffic on that lane degrades performance of the entire system, as each lane is exclusively dedicated to a particular movement. To overcome this problem, Combined Flexible Lane Assignment and Reservation-based Intersection Control (CFLARIC) is proposed, which offers more flexible lane assignment possibilities. While CFLARIC allows left- and right-turning lanes to be shared with through traffic, it is unclear how much through traffic should be assigned to turning lanes. Thus, this study investigates which strategy is the most beneficial when reassigning extra through traffic to the turning lanes. This goal is divided into two objectives: 1. Identify which lanes should be shared, and 2. Find a close-to-optimal amount of through traffic that should be assigned to the identified shared lane. The proposed CFLARIC strategies are compared with Fixed-Time Control (FTC), Full Reservation-based Intersection Control (FRIC), and CADLARIC for multiple demand scenarios. The results show that the best performing CFLARIC strategies outperform FTC, FRIC, and CADLARIC for delay and number of stops, and reduce the number of conflicting situations compared with FRIC and CADLARIC.
12 March 2022 in Transportmetrica A: Transport Science
Delay is one of the most important traffic signal performance measures. In coordinated networks, understanding the characteristics of vehicle arrivals is important for coordination purposes and to properly estimate delays. When observed on a cyclical basis in real-time, distinctive arrival patterns can lead to similar delays, which may go undetected by contemporary delay models. This study proposes a set of enhancements to the Incremental Queue Accumulation (IQA) delay model to overcome the limitations of current models. Additionally, this study proposes a hybrid signal performance measure that combines delay and arrival patterns to depict signal performance truthfully. The enhancements to IQA are realised through an algorithm for the identification of distinctive vehicle arrival groups based on high-resolution signal and detection data. The results demonstrate that the proposed model provides reliable delay estimates (MAPE score in range 4.3–11.2%) while reporting a number of traffic arrival characteristics that are not available from the benchmarked models.
7 November 2021 in Transportation Research Record: Journal of the Transportation Research Board
Current signal retiming policies are deficient in recognizing the potential of emerging traffic datasets and simulation tools to improve signal timings. Consequently, current practice advocates the use of periodically collected (low-resolution) traffic datasets and deterministic (low-fidelity) simulation tools. When deployed in the field, such signal timings require excessive fine-tuning. The most recent trends promote the use of high-resolution data collected at 10 Hz frequency. While such an approach shows promise, the process heavily relies on specific data sets that are neither widely available nor clearly integrated into the existing signal retiming practices and procedures. Interestingly, data collected in an ongoing fashion and aggregated in several-minute bins (referred to here as medium-resolution) have not received much attention in the traditional retiming procedures. This study examines traditional signal retiming practices to provide a contextual framework for the other retiming alternatives. The authors define and classify different resolutions of various traffic data used in the signal retiming process and propose a signal retiming procedure based on widely available medium-resolution data and high-fidelity simulation modeling. The authors apply the traditional (low-resolution and low-fidelity) and a proposed (medium-resolution and high-fidelity) approach to a 28-intersection corridor in southeastern Florida. Signal timing plans developed from the proposed approach outperformed current plans from field and those plans developed in the traditional approach by reducing the average delay anywhere between 6.5 and 26%. With regard to the number of stops, changes for the traditional and proposed approaches were of much lower significance when compared with the field signal timings. The traveling speeds have been increased by 4.1%–18% by the proposed signal timings and delay was not transferred onto the neighboring streets, as was the case for plans developed by the traditional approach. Development, calibration, and validation of models within the proposed approach are more time-consuming and challenging than the modeling needs of the traditional approach. One direction of future research should address the automation of calibration and validation procedures. The other direction for future research should be related to the field evaluation of proposed signal timing plans.
8 July 2022 in Transportation Research Record: Journal of the Transportation Research Board
Emerging high-resolution datasets allow for developing traffic signal performance measures (TSPMs) which can provide a better understanding of traffic signal operations. One of the specific objectives of signal operations is related to the measurement of capacity utilization. A fundamental measure for capacity utilization is the “degree of saturation” ( DS), and it has both volume-based and occupancy-based formulations. The former is known as “volume over capacity ratio” ( V/C), whereas the latter is known as “green occupancy ratio” ( GOR). When V/C is used to observe capacity utilization, it is not known whether the capacity is utilized from interrupted flow, free flow, or a combination of two. Similarly, the amount of time in the cycle utilized by volume (characterized with the first and last vehicle arrival time) is not revealed within V/C. On the other hand, GOR“overlooks” cases when a high number of vehicles travel without stopping or fewer vehicles depart the signal with significant startup delays and similar. In addition, because of a lack of scientific attention, GOR has often been misinterpreted as some similar, yet different TSPM. Therefore, if only V/C or GOR are used to monitor signal performance, the understanding of utilized capacity will be incomplete or misleading. This study proposes three TSPMs: “queued volume in volume to capacity ratio” ( QViV/C), “cycle utilization” ( CLU), and “volume-occupancy capacity utilization” ( VOCU) to overcome the limitations of V/C and GOR. Also, by evaluating existing occupancy-based measures, it was found that they can be used to estimate capacity utilization, including oversaturated conditions.